instrument cluster
Thread Starter
|
Road Captain
Joined: Nov 2005
Posts: 633
Likes: 1
From: Sterling Heights, MI
instrument cluster
Does anyone have a tip on how to lift the instrument cluster so I can install a Badlands turn signal module (1985 FLTC). I do not have a fairing, I'm running a windshield. I removed the two screws but there doesn't seem to be enough slack to lift it up. Thanks
Last edited by WVICEMAN; Apr 28, 2013 at 11:31 AM.
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
The thing holding you back is probably the speedo cable. If you slacken the front wheel axle nut, so the speedo drive can turn on the axle, you should be able to lift the instruments a little further, so you can get to the knurled ring holding it to the speedo. If that doesn't help, remove the axle so the speedo drive unit is free of the axle.
Thread Starter
|
Road Captain
Joined: Nov 2005
Posts: 633
Likes: 1
From: Sterling Heights, MI
The thing holding you back is probably the speedo cable. If you slacken the front wheel axle nut, so the speedo drive can turn on the axle, you should be able to lift the instruments a little further, so you can get to the knurled ring holding it to the speedo. If that doesn't help, remove the axle so the speedo drive unit is free of the axle.
Thread
Thread Starter
Forum
Replies
Last Post
300mmsoftail
Touring Models
13
Aug 21, 2012 06:04 PM
