07 RG exh. bracket failure
#1
06-08-2008, 01:40 PM
07 RG exh. bracket failure
 \\;At 8k miles I found rear pipe bracket near head (cheesy stamped metal with 90 bend) broken. Replaced,aligned and checked for stress. 11k failed again.
 \\;Im guessing this is a common problem and was wondering what correction/improvement you folks have come up with.
 \\;Im guessing this is a common problem and was wondering what correction/improvement you folks have come up with.
#2
06-09-2008, 09:27 PM
Tourer
Join Date: Nov 2006
Location: Western North Carolina
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
RE: 07 RG exh. bracket failure
ORIGINAL: baybueller
 \\;\\\\\\;At 8k miles I found rear pipe bracket near head (cheesy stamped metal with 90 bend) broken. Replaced,aligned and checked for stress. 11k failed again.
 \\;\\\\\\;Im guessing this is a common problem and was wondering what correction/improvement you folks have come up with.
 \\;\\\\\\;At 8k miles I found rear pipe bracket near head (cheesy stamped metal with 90 bend) broken. Replaced,aligned and checked for stress. 11k failed again.
 \\;\\\\\\;Im guessing this is a common problem and was wondering what correction/improvement you folks have come up with.
Thread
Thread Starter
Forum
Replies
Last Post
