need help quick
Thread Starter
|
Advanced
Joined: Jun 2010
Posts: 83
Likes: 0
From: Door County, WI
need help quick
I am installing 2" by 40" long drag pipes on my '95 dyna superglide. It has a stock aircleaner. I have done some research and have come up with a carb setting of a 45 pilot jet and a 170 for a main, two shims under the needle and 2 turns out on the a/f mixture screw. But I can only get a hold of a 42 right now. The one in the carb now is a 46. likes to foul out the rear plug. Will a 42 work or is that gonna be too lean? Gonna run a 170 for a main. I do have torque cones for the pipes.
Stellar HDF Member
Joined: May 2009
Posts: 2,856
Likes: 127
From: Middle of Kansas
I have 1-3/4" drag pipes on my 99 Softail Custom with a K&N air filter, and have a 45 pilot jet, and 180 main jet. No shims on needle. Works great, and plugs are light tan to grey. The rest of the motor is stock.
Thread
Thread Starter
Forum
Replies
Last Post
