When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Good afternoon all.
I currently am in the process of adding 4" stretched bags to the Roadking. The bags are at the painters and will hopefully be done soon. My question is as the thread title states, "how long should the paint be allowed to cure before I can put a good coat of wax on the bags. Also plan on installing hog skins on the lids to protect the tops from being scratched by that wayward boot. I'm sure the painter will let me know the time frame, but just thought I would throw it out there and ask those that have had previous experience.
Thanks
Yep ... "stupid_rope" is correct ... in fact many manufacturers of paints recommend 60 days and there are finishes that will allow the paint to breath after the curing process too ... but definitely give it enough time to "breath out"
You're in a cold climate. Give it 60 days.A few hot spring days[like 75-80 degrees,and it's time to wax it.The hogskins-no way I'd do them before 60 days.. Wax your car in the mean-time!
Back many years ago when I ran a paint dept. for a sign company we use to load the mix up with accelerator and the finished product would be rock hard within 24 hr.'s.
Of course we had a bad habit of ODing the mix & this was during the warm-hot months.
As for the OP, I would still wait for around the 30 day mark in a 75*+ atmosphere before waxing.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.