becoming a motorcycle mechanic
Thread Starter
|
Road Master
Joined: Apr 2007
Posts: 1,047
Likes: 1
From: fresno california
becoming a motorcycle mechanic
welll i have spent most of my work a day life doing jobs and working for someone else in crummy job's i hated just because the pay was pretty good.
now someone once said find something you love to do and then figure out a way to get paid for it and you'll never work another day in your life
so i figure i got another 30 usable years as a worker left in me and i have been wrenching all my life on both motorcycles and cars, cars i hate to do there's just so much crap under the hood of today's cars and you nearly always rack your knuckles on something
motorcycles on the other hand have every major component within easy reach and are a pleasure to work on
so i guess my question to you guys is where should i start to get my accreditation as a certified motorcycle mechanic?
i have seen those online schools that provide lessons from home and online
they are a little more reasonable as far as cost goes
but they don't seem like they could provide the kind of instruction a hands on school could offer
however they are usually in Florida or Wisconsin or something that would require a lot of student loan and grant money to keep me there for as long as the courses require
anyway what do you guys think? whats the best way to go about this?
freebyrd
now someone once said find something you love to do and then figure out a way to get paid for it and you'll never work another day in your life
so i figure i got another 30 usable years as a worker left in me and i have been wrenching all my life on both motorcycles and cars, cars i hate to do there's just so much crap under the hood of today's cars and you nearly always rack your knuckles on something
motorcycles on the other hand have every major component within easy reach and are a pleasure to work on
so i guess my question to you guys is where should i start to get my accreditation as a certified motorcycle mechanic?
i have seen those online schools that provide lessons from home and online
they are a little more reasonable as far as cost goes
but they don't seem like they could provide the kind of instruction a hands on school could offer
however they are usually in Florida or Wisconsin or something that would require a lot of student loan and grant money to keep me there for as long as the courses require
anyway what do you guys think? whats the best way to go about this?
freebyrd
Road Captain
Joined: Apr 2009
Posts: 566
Likes: 4
From: First State
I don't know how old you are, but a formal education is always better if you like school. A career that uses your brain always gets ahead faster than a career uses the hands. Try to develop your critical thinking skills, you will set for life. Good luck.
Seasoned HDF Member
Joined: Apr 2008
Posts: 23,050
Likes: 12,326
From: Arkansas
I went to MMI in Phoenix back in the late 80's. It wasn't cheap but getting a job was almost automatic when I finished.
People can say what they want but it gave us the basics from which too build on and as far as I know it's about the only way for someone just getting into the business to get the coveted H-D PHD certification.
I stopped working on them for a living for a couple of reasons.
The first being that I couldn't go anyplace around the area I lived in without someone coming up and wanting advice on fixing something on their bike. Although it was a good way to get free drinks at the local scooter bars.
The second is, I was spending so much time working on other people's that I got to the point that when I was home I didn't want to work on my own.
Though not as important too me, there was a 3rd reason. That was that back then there just wasn't much $$$ in being a wrench and working for someone else. Going out on my own would have required a very large outlay of cash that I just didn't have at the time.
I could probably do it now but it's been so long since I seriously worked on bikes that I'd be lost trying to figure out the new stuff and would do more harm than good.
Whatever you decide to do...Good luck with it.
People can say what they want but it gave us the basics from which too build on and as far as I know it's about the only way for someone just getting into the business to get the coveted H-D PHD certification.
I stopped working on them for a living for a couple of reasons.
The first being that I couldn't go anyplace around the area I lived in without someone coming up and wanting advice on fixing something on their bike. Although it was a good way to get free drinks at the local scooter bars.
The second is, I was spending so much time working on other people's that I got to the point that when I was home I didn't want to work on my own.
Though not as important too me, there was a 3rd reason. That was that back then there just wasn't much $$$ in being a wrench and working for someone else. Going out on my own would have required a very large outlay of cash that I just didn't have at the time.
I could probably do it now but it's been so long since I seriously worked on bikes that I'd be lost trying to figure out the new stuff and would do more harm than good.
Whatever you decide to do...Good luck with it.
Road Captain
Joined: Apr 2009
Posts: 566
Likes: 4
From: First State
44 years, it means that you have at least 24 or so years of working experience under your belt. Using those experiences, to your advantage.
1. Identify your own strengths, list them out.
2. Identify your passions, list them out.
3. Looking opportunity and niche that you can use No 1 and 2
4. Start doing homework, and work on the concept and proof of concept.
5. Modify your plans and don't give up.
6. Nothing is easy but persistent and hard work will always pay.
7. Trust me, it is not hard to get ahead. Money is everywhere, you just need to learn how to pick it up efficiently.
Remember, always think and evaluate and ask tough questions. It pays to reinvent yourself. All the best.
1. Identify your own strengths, list them out.
2. Identify your passions, list them out.
3. Looking opportunity and niche that you can use No 1 and 2
4. Start doing homework, and work on the concept and proof of concept.
5. Modify your plans and don't give up.
6. Nothing is easy but persistent and hard work will always pay.
7. Trust me, it is not hard to get ahead. Money is everywhere, you just need to learn how to pick it up efficiently.
Remember, always think and evaluate and ask tough questions. It pays to reinvent yourself. All the best.
Road Warrior
Joined: Mar 2009
Posts: 1,843
Likes: 5
From: PacNW (Olympic Pennsula)
He now admits he was full of Crap.
Your turn.
And just because you use your hands to make a living,
means you don't use your brain or thinking skills?
So to you a Man's success is equal to the amount of money he makes.
What a crock!!!
Rant over.
Trending Topics
Extreme HDF Member
Joined: Nov 2006
Posts: 13,389
Likes: 26
From: Windham,Maine
Not a 100% correct,there are a lot of jobs still available,that pay very well,and not required to have any degrees.You pay your dues,earn your way, learn as you go,become a skilled worker and there are great rewards.Never forget this world was built with blood sweat and tears,not pencils and pens.A formal education can only help.Good Luck
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Road Warrior
Joined: Jul 2007
Posts: 1,460
Likes: 1
From: pasco county FL
Buy a couple old shovelheads .... not only are they really cheap right now, but they will certainly make a bike mechanic out of anyone ..... gotta be kickstart only!!! Upside is guys that CAN do classic bike maint & repair , can prolly start thier own shop much easier than one catering to newer bikes ..... newest shovels were in 84/85 depending on model and YES there were 85 shovels , mostly police or export. Upside is no computers , hell electronic ignition was new in 1978!!!
Elite HDF Member
Joined: Dec 2008
Posts: 3,947
Likes: 1
From: Little Apple, Iowa, U.S.S.A.
This kind of thinking and the attitudes that go with it are what really suck. I have way more respect for people who actually "do something" than any educated idiot sitting behind a desk. I cannot debate the accuracy of the statement above. I do question the "I went to college, I sit behind a desk, deserve more money, and that makes me better than you" mentality of our society.
