Centre stand
Club Member
Joined: Oct 2007
Posts: 30,914
Likes: 16
From: Springfield, Ohio
I used the center stand on my half ton Aspencade quite a bit.......you just gotta be careful where you use it though. Wasn't hard to put it up on the stand, but could be a bit tricky getting it down. When you pushed forward on the bars, the stand wanted to scoot instead of flip up.
Tourer
Joined: Oct 2008
Posts: 290
Likes: 1
From: Oxford, MS
I used the center stand on my half ton Aspencade quite a bit.......you just gotta be careful where you use it though. Wasn't hard to put it up on the stand, but could be a bit tricky getting it down. When you pushed forward on the bars, the stand wanted to scoot instead of flip up.
Outstanding HDF Member
Joined: Feb 2006
Posts: 2,179
Likes: 0
From: Boca Raton, Florida
I'd like to see one for a lowered Wide Glide (01)!
On the other hand, I think I'll print off a picture, go out to the garage and muse over what a little grinding, welding, and re-painting might accomplish!
"Tinkering" is such a gratifying past-time!!!
Jim aka kiltiemon
On the other hand, I think I'll print off a picture, go out to the garage and muse over what a little grinding, welding, and re-painting might accomplish!
"Tinkering" is such a gratifying past-time!!!
Jim aka kiltiemon
Thread
Thread Starter
Forum
Replies
Last Post
