Please help
Thread Starter
|
Stage II
Joined: Apr 2014
Posts: 2
Likes: 0
From: Australia
Please help
Hey guys, looking at putting 10" mini apes on my 2013 883 superlow, people been telling me all I'll need ta change is my brake cable , can anyone on here confirm that definitely from own experience ? Thanks
Road Captain
Joined: Jun 2013
Posts: 669
Likes: 4
From: Rockwall,TX
First of all welcome aboard from Texas 
I cannot answer from experience, but what I do know from researching is that everything on the bars will need to be looked at and measured for proper length and replaced accordingly no hard rules do to different design bar lengths/widths and existing length of brake lines, throttle cables and electrical wires. There is a vender here that sells bars with all the cables you need as a package deal and will even internal route the electrical for you for a cleaner look and no guess work on your part
I cannot answer from experience, but what I do know from researching is that everything on the bars will need to be looked at and measured for proper length and replaced accordingly no hard rules do to different design bar lengths/widths and existing length of brake lines, throttle cables and electrical wires. There is a vender here that sells bars with all the cables you need as a package deal and will even internal route the electrical for you for a cleaner look and no guess work on your part
Outstanding HDF Member
Joined: May 2009
Posts: 2,608
Likes: 2
From: Bedford Co. Pa .
First of all welcome aboard from Texas I cannot answer from experience, but what I do know from researching is that everything on the bars will need to be looked at and measured for proper length and replaced accordingly no hard rules do to different design bar lengths/widths and existing length of brake lines, throttle cables and electrical wires. There is a vender here that sells bars with all the cables you need as a package deal and will even internal route the electrical for you for a cleaner look and no guess work on your part
I cannot answer from experience, but what I do know from researching is that everything on the bars will need to be looked at and measured for proper length and replaced accordingly no hard rules do to different design bar lengths/widths and existing length of brake lines, throttle cables and electrical wires. There is a vender here that sells bars with all the cables you need as a package deal and will even internal route the electrical for you for a cleaner look and no guess work on your part
Outstanding HDF Member
Joined: Nov 2012
Posts: 2,422
Likes: 14
From: Fla
Check the Sportster section...
Surely, there will be riders that know for sure. Can't say for sporties, but I had ample length on all stock cables/brake lines/wires to install 12" mini apes on my RK.
Surely, there will be riders that know for sure. Can't say for sporties, but I had ample length on all stock cables/brake lines/wires to install 12" mini apes on my RK.
Last edited by Def Mute; Apr 18, 2014 at 12:48 PM.
Thread
Thread Starter
Forum
Replies
Last Post
