Code P0118 ET sensor open or high
Thread Starter
|
1st Gear
Joined: May 2016
Posts: 5
Likes: 0
From: Louisiana
Code P0118 ET sensor open or high
I took my 08 Heritage Softail to the car wash Saturday, after washing it up I cranked her up and the check engine light came on. I figured out how to check my codes and P0118 came up in which its ET Sensor open or high. Why would this happen after washing it? I've looked for loose wires but cannot find any. I'm not sure where the sensor is, my manual says its one place and online it says it somewhere else. Looked in both places and still saw no loose wires. Could it be a fuse?? Please help
Seasoned HDF Member
Joined: Jan 2013
Posts: 10,637
Likes: 1,246
From: Lake, Ms
The Engine Temp Sensor is right behind the horn screwed in to the back of the front cylinder. Had issues with mine as well. Mine turned out to be a broken wire in the harness. Wire was broken inside the wire sheath.
Thread Starter
|
1st Gear
Joined: May 2016
Posts: 5
Likes: 0
From: Louisiana
Is the plug in totally inclosed
The Engine Temp Sensor is right behind the horn screwed in to the back of the front cylinder. Had issues with mine as well. Mine turned out to be a broken wire in the harness. Wire was broken inside the wire sheath.
Attachment 474095
Attachment 474095
Thread
Thread Starter
Forum
Replies
Last Post
KennyPowerz
General Topics/Tech Tips
6
Jun 6, 2018 10:30 AM
JEdwardsJr
Ignition/Tuner/ECM/Fuel Injection
1
Sep 27, 2014 06:52 PM
