HELP power comander fuel %

Reply Subscribe

Thread Tools

Search this Thread

May 22, 2008 | 08:41 PM

ardbark

Thread Starter

Intermediate

Joined: Feb 2008

Posts: 44

Likes: 0

HELP power comander fuel %

JUST GOT POWER COMANDER, STILL HAVE POP ON DECELL
BEEN READING POST AND RECOMEND ADDING FUEL ON THE THROTTLE % TO ABOUT 4-6 %
BUT i DO NOT KNOW HOW TO DO THIS .

May 23, 2008 | 12:59 AM

SK8ROD

Banned

Joined: Mar 2008

Posts: 602

Likes: 0

From:

RE: HELP power comander fuel %

if your not sure of that then i wouldnt frig about with it, load a different map or go get it dyno tuned

May 23, 2008 | 01:20 PM

wallyn

Road Captain

Joined: Nov 2006

Posts: 709

Likes: 1

From:

RE: HELP power comander fuel %

try a different MAP first. The Acelerator PUMP function won't really help in your condition.

May 27, 2008 | 02:27 PM

JoeSwiatek

Advanced

Joined: Nov 2007

Posts: 81

Likes: 0

RE: HELP power comander fuel %

I added fuel (+15) in the 0% column from 1750 RPM to 6250 RPM and it minimized my decel. popping. Bike runs strong and gets over 40 MPG.

May 27, 2008 | 02:32 PM

JoeSwiatek

Advanced

Joined: Nov 2007

Posts: 81

Likes: 0

RE: HELP power comander fuel %

I added fuel (+15) in the 0% column from 1750 RPM to 6250 RPM and it minimized my decel. popping. Bike runs strong and gets over 40 MPG.

May 27, 2008 | 03:01 PM

Sublime1

Cruiser

Joined: May 2008

Posts: 208

Likes: 0

From: McKinney, TX

RE: HELP power comander fuel %

there was a map out there that suggested 18-20 in the 1500 - 2000 rpm column.

I found that it was too much. I adjusted to 12% in each of those and pop on decel all but gone.

However, when i go barhopping, i put the old map on because there's nothing like pulling up, dropping the hammer and POP PAKOW POP POP.

LOVE THAT $hit !