When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Planning a ride from Ft. Worth to Tucson, AZ and want to stay off the interstates. Does any one have experience with roads in West Texas especially HWY 380 and 180? Thanks.
I didn't figure there would be much to see in that part of TX as far as scenery goes. More interested in road quality and towns along the way. Thanks for the info.
US380 has good pavement all the way. There is construction just west of Denton. I think it's a nice ride, too. Rolling hills most of the way until about Post then it's flat until you get into NM.
The areas around Ruidoso and Cloudcroft, NM are really nice. If you have time, take a day and ride the roads around there.
You can take 380 all the way to I25 then up to Socorro NM. 60 west out of Socorro to Datil then look at 12 south to Reserve. 180 south out of Reserve to 78 south of Glenwood cross into AZ.Then 191 to I10 at Wilcox. I have been this way a couple of times roads are good and you get to see a great deal of the Gila below Datil to Glenwood.
I've ridden both from Arlington to New Mexico. They're very similar, there's just not much to see until you get well into New Mexico. Both have good pavement and the little towns are spaced about every 30 miles it seems.
You can take 380 all the way to I25 then up to Socorro NM. 60 west out of Socorro to Datil then look at 12 south to Reserve. 180 south out of Reserve to 78 south of Glenwood cross into AZ.Then 191 to I10 at Wilcox. I have been this way a couple of times roads are good and you get to see a great deal of the Gila below Datil to Glenwood.
Don't forget to stop in San Antonio, NM. for burgers. Two of the best places in the state right there..
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.