adjusting pushrods
Thread Starter
|
Novice
Joined: Aug 2007
Posts: 15
Likes: 0
From: Southern Indiana
adjusting pushrods
I have a Clymer but it's not for a shovel and also not very detailed. I get the idea on what I've read so far about adjusting the pushrods except how/where to access the pushrod for making the adjustment. If I understand correctly it appears that the tubes need to be push up and then there is an adjustment nut there?
This is my first harley and what a first! I didn't know it was a shovel, hehe. That's why I have the wrong manual. I have come to call mine a Johnny Cash Harley since it turns out it is assembled from parts that span many years. I posted yesterday about the clattering sounding normal to me but know that I have read more and see that the pushrods are adjustable thought maybe I can take some of the clatter out. Although maybe I shouldn't, people are beginning to recognize the sound and know it's me that has just arrived. And if they're not home they'll know I was there by the mark the ol' wolf left on there nicely paved drive, hehehe
This is my first harley and what a first! I didn't know it was a shovel, hehe. That's why I have the wrong manual. I have come to call mine a Johnny Cash Harley since it turns out it is assembled from parts that span many years. I posted yesterday about the clattering sounding normal to me but know that I have read more and see that the pushrods are adjustable thought maybe I can take some of the clatter out. Although maybe I shouldn't, people are beginning to recognize the sound and know it's me that has just arrived. And if they're not home they'll know I was there by the mark the ol' wolf left on there nicely paved drive, hehehe
Seasoned HDF Member
Joined: Oct 2005
Posts: 7,481
Likes: 3,677
From: Santa Klaus County, Cali
RE: adjusting pushrods
notbob, you need to figure out whether you have hydraulics or solids. Adjustment is different for both.
I would highly recommend HD or Clymers manual befor you start tinkering. I prefer HD but to each his/her own.
Do you know who did the motor. I can tell you that if the tappet were not installed with holes to center of guide, the oil will not feed across and hyraulic unit cannot fill with oil. Just a thought on engine noise. Normall on start up there is some noise, but it should quiet down once engine is warm.
I would highly recommend HD or Clymers manual befor you start tinkering. I prefer HD but to each his/her own.
Do you know who did the motor. I can tell you that if the tappet were not installed with holes to center of guide, the oil will not feed across and hyraulic unit cannot fill with oil. Just a thought on engine noise. Normall on start up there is some noise, but it should quiet down once engine is warm.
Thread
Thread Starter
Forum
Replies
Last Post
JustDave71
Exhaust System Topics
7
Jul 16, 2010 01:41 PM
