Custom Dynamics Load Stabilizer & Triple Play Install Help Needed

Reply Subscribe

Thread Tools

Search this Thread

Jun 27, 2017 | 05:18 PM

broadstone

Thread Starter

6th Gear

Joined: Jun 2017

Posts: 11

Likes: 2

From: Orlando

Custom Dynamics Load Stabilizer & Triple Play Install Help Needed

Hi...

I'm attempting to install the Custom Dynamics Load Stabilizer & Triple Play in my 2013 Sportster 1200 Custom. I've watched their install video which shows connecting the modules to the electrical wiring harness under the seat.

On my bike, the connectors are different under the seat (custom Dynamic module connector in left of my hand, my bikes wire on right):

so the Custom Dynamics module doesn't fit.

I'm thinking the wires must be in some other location. I checked behind the left battery panel but didn't see anything to connect to:

Thought I'd ask before I start tearing the bike apart as I probably won't be able to put it back together

Thanks in advance for any guidance.

Jun 27, 2017 | 05:26 PM

cvaria

Seasoned HDF Member

Joined: Sep 2012

Posts: 12,367

Likes: 2,215

From: Tallahassee, Florida

Under the seat.

there is enough room to stack the modules under the wires.

load balancer patched inline before the triple play

Last edited by cvaria; Jun 27, 2017 at 05:41 PM.

Jun 27, 2017 | 05:46 PM

broadstone

Thread Starter

6th Gear

Joined: Jun 2017

Posts: 11

Likes: 2

From: Orlando

hey thanks for the photos. I'm not seeing the cables you have on your bike under my seat? I just see the large connecter.

What am I missing?

Jun 27, 2017 | 05:58 PM

cvaria

Seasoned HDF Member

Joined: Sep 2012

Posts: 12,367

Likes: 2,215

From: Tallahassee, Florida

Quote:

Originally Posted by broadstone

hey thanks for the photos. I'm not seeing the cables you have on your bike under my seat? I just see the large connecter.

What am I missing?

pull them all. no changes till 2014.

may be under those you are seeing. let me dig some

Jun 27, 2017 | 06:19 PM

broadstone

Thread Starter

6th Gear

Joined: Jun 2017

Posts: 11

Likes: 2

From: Orlando

Hey thanks for your help, I found the connector. It was tucked up under the rear fender.

Got the modules hooked up and working, now just need to figure out where to secure them as there isn't any spaces like on your bike