That GB is gonna be the icing on the cake.

 

rb pipe?

 

OK GOT SOME NEW, STUFF, WELL I GOT CALIPERS BACK FROM POWDERCOATER, IN PICS, YOU CANT TELL, BUT THERES A METALLIC IN THERE, VERY VERY CLOSE TO FRAE COLOR, JUST DIDN'T GET THAT "PRO" PIC, WORK 12 HRS A DAY, AND DOING TONNNNS OF WORK ON BIKE AT NIGHT....ANYHOW

I LAID OUT WHAT ILL BE USUING, THAT CALIPER GREASE SUPPOSED TO BE THE "BEST" HEARD FROM MANY SORCES, SO ILL GIVE A WHIRL
WE CAN THANK ROCKER B FOR TURNING ME ON TO DIAMOND ENGINEERING, I NOW HAVE 3-400 WORTH OF THERE H

ARDWARE ON BIKE, YOU'LL SEE WHEN ITS ALL OVER I DID IT ALL IN 12 POINT SO IT ALL MATCHES, ROCKER BOXES, PRIMARY, SHARP SHARP STUFFF, AND PISSESS ALL OVER GRADE 8

VERU EXPENSIVE, BUT IM A FIRM BELIEVER , GET WHAT YOU PAY FOR....

 

NOW THOSE ARE THE BEST PADS ON THE MARKET, I BOUGHT DIRECT, AS THE OLD ONES WERE GOLD, AND THERE AL OVER INTERNET 60$ A PAIR, THESE STOP EXCELLENT, ORGANIC, LEAVE ALMOST ZERO DUST FOR MY NICE NEW ROTORS, AND FOR CALIPERS, DONT THINK BORING BLUE,.,.,

"THINK OUTSIDE THE BOX!!"" I HAVE ALL CHROME "JEWELERY" HARDWARE, I CHROME DIPPED REAR CALIPER HOLDER, I HAVE THE HARLEY LOGOS, I HAVE POINTED BANJO BOLTS, CHROME, AND THE MAGNUM SHIELDING CHROMITE 2 CABLES, AGAIN THANKS TO ROCKER B, ****, HONESTLY, I HAVE TO GIVE A SUPER HUGE THANK-YOU WHEN THIS IS ALL OVER, IMEAN I EMAILED HIM 100'S OF TIMES, ALWAYS RESPONDED, HELPED ME IN SO MANY WAYS, I MEAN, HES A SOLID DUDE, BUT

WE ALL KNOW THT, IF YOU NOW HIM THAT IS!!!


















I WANTED TO "TRY" THE GEL, NEVER USED, AND WITH THE USUAL, LIQUID, I USUALLY OVER SATURATE BOLT, OR GET ALL OVER THE DAMM PLACE, LOL, READ REVIEWS, WENT ON PERMATEX SITE, SAME HOLDING STRENGTH, OH I ALSO USE A WHITE THREADLOCK,

I NEVER SEE IT MENTIONED IN HERE, WITH ALL THESE ENGINE BUILDERS, SORRY NOT ******* ANYONE, RESEARCH THIS WHITE STUFF I JUST TOOK PICS, AND YOU YELL ME HOW YOUR GOING TO THREADLOCK, AND ENGINE/OIL RELATED HARDWARE, OR FOR THAT MATTER ANYTHING THAT GETS HOT!!

, WELL WHEN I HAD MY HOBBY SHOP, AND THESE 900$ R/C RACE MOTORS, WE WOULD REBUILD WITH WHITE THREADLOCK, ILL TAKE PIC W/TOLERANCE VES,MATCH UP WITH HOLDING STRENGTH, YOU'LL BE PLEASANTLY SURPRISED, I NEVER SAW THIS IN ANY STORE, BUT ONLINE YOUYLL FIND IT....









SO WITH THE MOTION PRO BLEEDING SYSTEM, WHICH I USED ON MY QUADS AND DIRT BIKES, WORKED AWESOME, ONE MAN JOB, VERY LITTLE WASTE, I DID THE WHOLE PUMP DEAL, ETC, NOTHING, IN MY CASE WORKED BETTER THAN THIS TOOL, AND THE SPEEDBLEEDERS UP THERE, THERE BASICALLY A CHECK VALVE TO KEEP AIR OUT, SO I DON'T HAVE TO SQUEEZE HOLD, TIGHTEN, LET GO OF LEVER , RE PEAT, ALTHO THATS EXACTLY WHAT IM GOING TO DO, YOU REALLY ONLY HAVE TO HOOK UP BOTH , LEAVE SPEEDBLEEDER OPEN, KEEP SQUEEZING LEVER TILL NO MORE AIR BUBBLES, ANDD MAKEE SURE YOUR ADDING MORE AS YOU DO!

I ALWAYS GET A BUDDY TO DO THAT MINDLESS, BUT VERY IMPORTANT JOB....FORGET THE PUMP, AS YOU AL HAVRE SEEN IN MY BUILD THREADS I ALS SHOW YOU TOOLS I USE TO GET THINGS DONE, THAT CHEAP Home Depot SOCKET SET, IS ALLL 12 POINT, SO I HAVE A 200$ SNAP. ON SET COMING, BUT FOR THE BRAKES, AND YOU SEE TORQUE WRENCH ON LEFT WITH RATCHETS, IT WILLL BE JUST FINE, I AKWAYS START WITH SMALLEST SOCKET DRIVER TO GET BOLT PRETTY MUCH ALL THE WAY IN, AS TO NOT SCRATCH HARM ANYTHING, AND ITS ALOT EASIER!!













THIS CHROME, CLIP DEAL IS THE BEST, HERE I SHOWED HOW THE 2 ARMS COME APART, AND CAN STICK ANYWHERE, RARE EARTH MAGNETS, SO ILL BE DOING ALOT OF CHASSIS WIRE SOLDERING WHEN I REMOVE TANK, THIS TOOL WILL BE WAY BETTER THAN A 3RD HAND STAND, I CAN PLACE ANYWHERE ON CENTER BEAM UNDER TANK, ANY WICH WAY HOLD THE WIRES EXACTLY AS I WANT, I USED A FEW TIMES,SIMPLY AWESOME

I REMOVED ONE ARM, PLACED 5 INCHES DOWN TO HOLD THE "WHOLE ASSEMBLY" I BOUGHT 3 OOF THESE, SO I PUT ONE IN CENTER AND ONE LIKE 10" DOWN, ILL FOND PIC, WHEN YOU SEE, IM SURE ILL BE GETING REQUESTS FOR PART NUMBER ETC, WASN'T CHEAP, EACH ONE WAS LIKE 26$, I MEAN ITS NOT EXPENSIVE FOR ONE, BUT FOR 3 TO HOLD WIRES, NOT THAT IM CHEAP, JUST I KNOW ONE OF MY HOOLIGAN FRIENDS IS GOING TO GRAB ONE, THATS WHY I ORDERED 3, LOL

 

OK MORE PICTURES, GIVE ME A FEW DAYS, AS I MAY BE CHANGING TIRES, I HAVE 200 MILE TOPS, AND THATS RUNNING IN MOTOR, METZLER 260 REAR AND THE STOCK 19 FRONT, ITS HUGE, ILL SHOW PICS,ID TAKE A "REASONABLE OFF, AND THEY HAVE THE "RIDE-ON" ALREADY IN TIRES, THANKS TO ROCKER B AGAIN, NOT ONLY THE BEST WHEEL BALANCER, KEEPS BALANCING WAU PAST 100MPH THE BEADS FALL OFF AFTER 60, THEY ALSO PREVENT YOU NOT GETTING HOME DUE TO A NAIL ETC, ITS LIKE A MOVABLE "SLIME", IT AIR STARTS TO GET LET OUT, IT QUICKLY FILLS HOLE, CHANCES ARE YOULL NEVER EVEN KNOW YOU HAD A FLAT, MY GUY WAS SKEPTICAL, WELL AFTER I TOLD HIM TO READ UP ON, HE GOT 3 BOTTLES FOR ME 15$ A BOTTLE, SO THATS 45$ OF BALANCNG RIDE-ON ALSO INCLUDED,HERE LOOK

JP CYCLES 75 REVIEWS NOT A SINGLE BAD ONE, 5-STARS!!!

https://www.jpcycles.com/product/353...hoCVQMQAvD_BwE


GREAT BUY IF YOUR IN NEED, JUST BE REASONABLE AND YOUYLL HAVE NEW TIRES, I POSTED PICS WITH RIMS, I TOOK OTHERS, ALL THOSE LIL SPIKY THINGS ARE ALL STILL ON TIRES, GOOD AS NEW, WAY I LOOK AT IT, I GOT THEM READY FOR YOU, AS THERE REAL SLIPERY AT FIRST!!! PM ME, BEST WAY,OR EMAIL ME
HERES A LINK , READ UP....COMES WITH TIRES, LOL, ITS FOUND ITS WAY TO LITERALLY COVER ENTIRE INSIDE, I USED EXACT AMOUNT THEY TELL YOU FOR TIRE SIZES, THANKS ROCKER B!!!

http://www.ride-on.com/motorcycle-formula-mot.html

TEMPIRELLC@HOTMAIL.COM

YOU TELL ME IF THERES ANY REASON TO GO 21"? BEING THE NEWER LAST OF THE BREAKOUTS THEY WENT DOWN TO A 18" RIDE QUALITY, I SEE ALL THESE CALIFORNIA BAGGERS W/26" PLUS RIMS, THERE SELLING CAUSE THE RIDE SUCKS, PLAIN AND SIMPLE, YOU WANNA LOOOK AT A 75K CUSTOM BIKE GO AHEAD, I RIDE!!

OK SO THIS IS THE SPLASH GARD FROM A BREAKOUT, LIKE OUR ROCKERS ON BELT SIDE HAVE THAT FAKE BIKE COLOR INSERT IN THERE, FOR REALISM LOOK, WELL I TOOK IT A STEP FURTHER ALL BREAKOUTS COME WITH THIS BLACK, I DID THIS MYSELF, Home Depot CANS,, EXACT MATCH IM TELLING YA, WAIT TILL YOU SEE THESE ON, HMY PAINTER. WANTS TO ADD HIS "TOUCH TO THESE, HES NOT GONNA GO CRAZY, AS I HAVE A BREAKOUT REAR FENDER ON, AND THIS LOOK SO NATURAL, LIKE THE ROCKER C DOES....CAME OUT SHARP, HARD TO SEE TRUE COLOR OF CALIPERS I DON'T KNOW WHY THEY LOOK SO DARK, MAYBE HTE
, WHICH THERES PLENTY OF, AND THE iPhone 8 CAMERA? DON'T KNOW, BUT ITS A GRAND SLAM, AND DRESSED UP AS SO, THERES GOING TO BE JUST MORE LIL DETAILS, THAT MAKES A CUSTOM BIKE,

























THERES THE SEALANT, IT EXISTS!!!!

ALSO IF YOU KNOW ME, OR BEEN FOLLOWING, TIMKEN OR BUST, LOOOK AT THE WIDTH DIFFERENCE, THESE FIT PERFECTLY ION RIM, THEY DON'T NEED THAT INNER BASICALLY 1/2" BLACK NIPPLE W/OUT THREADS, THEY CALL IT A SPACER, WELL YOU HAVE TO CUT IT A B IT, IF YOU GO THIS ROUTE, I MEAN, YOU KNOW THE WEIGHT OF THESE MACHINES, LOOK AT THE DEPTH DIFFERENCE, STOCK IS 15MM THESE ARE 20MM!!!! HELLO ANYONE LISTENING////?
THEY JUST HAVE TO BE DONE RIGHT, THE GUY WHO FIRST DID MY BIKE, THIS JP IDIOT, CUT SPACERS WRONG LENGTH, THEY JAMMED UP BEARINGS, ACTUALLY CAUSING FAILURE, THE BEARINGS WERE WALKED DUE TO WHAT HE CALLED MACHINING THE SPACER?///

IM A LICENSED PLUMBER AND HVAC CONTRACTOR, ANY Home Depot RIGID 20$ PIPE CUTTER WILL CUT THIS SPACER, PUT ON A VISE ON BENCH, DONE DESAL, MACHINED IT MY ***, HE SCREWED SOOOOO MUCH UP, THATS WHY YOU MAY BE SEEING ME RE-DOING WORK THAT WAS DONE, ITS NOT CAUSE BY CHOICE, I HAD TO FIX/REPAIR/CHANGE/ INSTALL PROPERLY, GUY HAS TO STICK TO LAWNMOWERS AND GAS CORD PULLED GENERATORS, ANYTHING THAT REQUIRES A TAD BIT OF SKILL WAS TOO MUCH FOR THIS ONE, LET ME TELL YOU!!!!

 

Thanks for the update!!

 

Great build, should be an eye catcher when your done.

 

I HAVE ALOT MORE LOOK WHAT CAME TODAY, GET WHAT YOU PAY FOR, THE QUALITY IS INSANE, I MEAN IT COSTS WHAT THE PRICE OF 2 ,<2-1> GOOD SYSTEMS WOULLD COST, BUT THE FLAGES, EVERYTHING, I NEVER

SEEN QUALITY LIKE THIS, OH AND THE BRAKES ARE BACK AT POWDERCOATER, THEY DONT MATCH, HES REE-DOING THEM









THAT SECTION IS ALL ONE PIECE!!!..its too sweet ill post more tomorrow its a teaser, I want my SE Ported %%mm throttle body back, with SE injectors first but I couldn't help

he landed both 18mm bungs e x a c t l l y where dyno jet recommends them to get the best reading etc, he makes you buy the hardware ss clamps, chrome flanges, I waited a long time and let tell you I have more pics, lots I've never seen this level of attention we talked once a month, its all welded, and on other side you don't see any imperfections,

oh and btw this is the inner pipe, I have the heat shield set as well, so he treats it all with love, I get it now

 

the pipe is not gonna sit as low in pic, just a idea how far back it will go, theres a shorter version, but I hit a home run, the"merge" collector, well I saw my indy putting in a basin and its nice and all, but it doesn't come together like this, and to many pieces to decelerate popping, this, I just slide one pipe EASILY INTO IT HOME, DONE,

SIMPLY AMAZING

MORE TO COME, I TRIED SO HARD TO NOT PUT THESE UP!!!























THE HEAT SHIELD CURVES ARE SOO SEXY, I mean this is a good looking pipe, my harley buds are drooling, but still. need motor part 2 to be worked, and obviously the intake, the SE. 50mm-55mm ported will hold me over, next winter, were timken mod, pinning a better s&s crank, and going 127CI BABY, YES I AM, thats why I wanna get all the head work done, I dont wanna ship a whole motor down, stronger crankshafts, believe me, im gettin ALL AND THE BEST POSSIBLE WORK DONE, I SCORED A BAKER GRUDGE BOX, WHICH WILL SIT TILL ITS NEEDED, AND IM GONNA HAVE TO GO TO A CHAIN, WITH 127 POWER...THIS IS GONNA BE A ROCKER LIKE NONE OTHER, YOU SAW ALL WHAT I DOING TO JUST THE BRAKE CALIPERS, WAIT TLL NEW CHROME/POWDERCOATED SINISTER UK HAND MADE APS 14" ARE DONE, AND I ALREADY CHROMED RIMS, WERE CONNA ADD A DRIVING 3-D EFFECT WITH POWDERCOATING!!!!

 

u meant RB, it's HERE BROTHA!!!SUCKS WONT GO ONE FOR AT LEAST A MONTH,


SORRY FOR DOUBLES GUYS, I WAS TRYING TO MAKE THE STAND STRAIGHT, AND ITS TURNED INTO FUBAR, TAKE A REAL REAL GOOD LOOK AT THESE PICS, AND YOU'LL SEE HERES A GENIUS MAKING THESE, THE GASKETS HE SOLD ME, HE WONT BUILD A PIPE FOR YOU IF YOU DON'T BUY HIS SEXY CHROME FLANGES, MOST IMPORTANTLY THE GASKETS, HE SAYS THE CRUCH STYLE COULD COVER 6% AND HIGER BETWEEN BOTH PIPES, HIS DESIGN IS EXTREMELY UNIQUE , WHEN I HAVE SOMEONE TO HELP ME, AND TIMES RIGHT YOU WILL SEE, UNTILL THAN I KNOW EXACTLY WHAT HE MEANT, AND I GUESS OTHER COMPANIES DO'T MAKE, CAUSE IF YOU LOOK AT THE BOTTLENECK., THE END WHERE FLAGE GOES, W/HIS GASKETS ,
NO DESIGN LIKE IT ON MARJET!!!