Keystone filler and saddlebag Run/Brake/Turn lights together
Thread Starter
|
Grand HDF Member
Joined: Sep 2017
Posts: 3,847
Likes: 999
From: Southern Virginia
Keystone filler and saddlebag Run/Brake/Turn lights together
Howdy all,
I finally found a set of the OEM Harley Keystone Auxiliary LED Run/Brake/Turn lights part number 67801080 new old stock at a good deal. I know lots of other companies make these types of lights but I never liked the light pattern as much as the OEM part. I got them installed and they are working great. A while back I also got a great deal on the saddlebag lights part number 67801023 and am thinking of adding them as well. The wiring is easy to figure out but I was wondering if anyone has installed BOTH of these part numbers and would be willing to share pics of the wiring.
The wiring for the keystone lights dressed easily along the fender (thnks to pics from this site). What I am curious about is how to route the wiring for the saddlebag lights so I could still get the bags off. It would be easy but I already have wiring connectors for the speakers in the lids of the bags. I made deutsch connections that sit right next to the handles of the lids so they are noticeable when you got to take the bags off so you are less likely to forget to unplug them. The plugs on the Harley parts are much bigger than the ones from Custom Dynamics and others.
Anyone feel like sharing?
I finally found a set of the OEM Harley Keystone Auxiliary LED Run/Brake/Turn lights part number 67801080 new old stock at a good deal. I know lots of other companies make these types of lights but I never liked the light pattern as much as the OEM part. I got them installed and they are working great. A while back I also got a great deal on the saddlebag lights part number 67801023 and am thinking of adding them as well. The wiring is easy to figure out but I was wondering if anyone has installed BOTH of these part numbers and would be willing to share pics of the wiring.
The wiring for the keystone lights dressed easily along the fender (thnks to pics from this site). What I am curious about is how to route the wiring for the saddlebag lights so I could still get the bags off. It would be easy but I already have wiring connectors for the speakers in the lids of the bags. I made deutsch connections that sit right next to the handles of the lids so they are noticeable when you got to take the bags off so you are less likely to forget to unplug them. The plugs on the Harley parts are much bigger than the ones from Custom Dynamics and others.
Anyone feel like sharing?
Road Master
Joined: Mar 2013
Posts: 787
Likes: 603
From: Alberta
I too prefer the Harley auxiliary rear lighting. Like you I shopped for NOS Keystones and like them. I have run the Harley saddlebag RBT lights on a few previous bikes, the connectors sit between the bags and the fender no problem. If that is what you’re asking. For the record, for outright visibility the saddlebag lights are tops.
Thread
Thread Starter
Forum
Replies
Last Post
cruise_carter
2014-2024 Touring Models
8
Sep 15, 2022 07:47 PM
Ciro3d
Vendor For Sale Classifieds
0
Jun 28, 2021 10:56 AM
