Front brake squeaks

Reply Subscribe

Thread Tools

Search this Thread

Feb 16, 2015 | 09:33 PM

Pete3323

Thread Starter

Road Master

Joined: Nov 2014

Posts: 777

Likes: 36

From: Woodland Hills, CA

Front brake squeaks

My 2k heritage has just at 1500 miles on it since new. I picked it up around 4 mos ago with 347 miles. Brakes are starting to squeak a bit on front. Couldn't b pads already? Any suggestions on quieting them? Thx.

Attached Thumbnails

Feb 16, 2015 | 09:43 PM

Steven725

Tourer

Joined: Jul 2014

Posts: 446

Likes: 37

From: Arizona

I would try to clean them first. They might have some dirt or grime in them causing them to squeak.

Feb 16, 2015 | 10:08 PM

jcsshane

Tourer

Joined: Feb 2014

Posts: 406

Likes: 5

From: NW Suburbs Chicago

I know you guys are in drought conditions.....but if the humidity is up {something you wouldn't be used to} front brakes will squeal like a pig.

Feb 22, 2015 | 09:03 PM

oct1949

Club Member

Joined: May 2007

Posts: 145,895

Likes: 821

From: 40 miles Northeast of Indy..

doubt they are worn out..Wondering did you flush the brale lines and you might need to clean the pads and Caliper pistons, they may be sticking a little

Feb 23, 2015 | 01:55 AM

Rodzilla6

Road Warrior

Joined: May 2010

Posts: 1,593

Likes: 11

From: Mass/NH

Just to be safe, check the front wheel bearing also. Most likely not it...but I had two fail under warranty...6 k on the first one and 7 k for the second, New bike stored inside...second failure happened at 65 mph...only warning was a squeaky brake...
Good thing is, a whole new set of quality bearings are only about thirty bucks.
Ride safe.

Mar 3, 2015 | 08:17 PM

Michael knowles

Tourer

Joined: Aug 2012

Posts: 482

Likes: 0

From: Vancouver

Dude check for dirt build up or glazing. Washout callipers. Buy ABS approved brake cleaner. Read instructions & be very careful applying to rotor & calliper. Cleaner can damage paint.

Mar 3, 2015 | 08:40 PM

Michael knowles

Tourer

Joined: Aug 2012

Posts: 482

Likes: 0

From: Vancouver

On another note:
I installed a display stand.
Whisker highway pegs. Parts book wouldn't fit. Simple removal of brake retaining clamp & replace with electrical sap straps pegs installed. Look awesome HD ribbed pegs.