No start, only click from Starter Relay
Thread Starter
|
Advanced
Joined: Apr 2009
Posts: 90
Likes: 6
No start, only click from Starter Relay
I need help please with a carbureted 2003 Springer.
While trying to adjust the Throttle friction adjusting screw the bike was starting fine 3 or 4 times in a row, then nothing, except the faint click from the Starter Relay. Bike is in Neutral with the Clutch pulled in.
I made sure battery was charged according to Charger, and tried another battery. Then I installed a new Starter Relay and a Button on the solenoid.
Still no start only the faint click.
While trying to adjust the Throttle friction adjusting screw the bike was starting fine 3 or 4 times in a row, then nothing, except the faint click from the Starter Relay. Bike is in Neutral with the Clutch pulled in.
I made sure battery was charged according to Charger, and tried another battery. Then I installed a new Starter Relay and a Button on the solenoid.
Still no start only the faint click.
Thread Starter
|
Advanced
Joined: Apr 2009
Posts: 90
Likes: 6
I found problem was in the wiring. Cleaned off all connections and it starts up just fine. I appreciate the help and advice from those that offered. Thanks
Last edited by americanworkmule; Feb 22, 2017 at 09:59 PM.
Thread
Thread Starter
Forum
Replies
Last Post
