Passemger Foot Peg Tool
Thread Starter
|
Tourer
Joined: Jan 2009
Posts: 478
Likes: 40
From: Bay Area - California Land of Libtards
Passenger Foot Peg Tool Question
Can anyone tell me what size Torx tool I need for the passenger foot peg? The Softails require a long reach tool to access the bolt. Anyone have a tool recommendation for this application? Brand and part number? Thank you!
Typo on the subject....NICE!
Typo on the subject....NICE!
Last edited by Detroit Iron; May 21, 2017 at 03:52 PM.
Elite HDF Member
Joined: Jul 2010
Posts: 3,830
Likes: 302
From: Lorain Ohio
I just bought a kit off ebay an they are a T-50 but a standard one is too short. I tried a regular allen wrench an a 1/4" is very close, if not too tight it may do the job. I'm installing peg mounts on my '15 slim, I think I'm going to stop by Lowe's an see if they sell a stand alone T 50 with a longer shank.
Thread Starter
|
Tourer
Joined: Jan 2009
Posts: 478
Likes: 40
From: Bay Area - California Land of Libtards
I just bought a kit off ebay an they are a T-50 but a standard one is too short. I tried a regular allen wrench an a 1/4" is very close, if not too tight it may do the job. I'm installing peg mounts on my '15 slim, I think I'm going to stop by Lowe's an see if they sell a stand alone T 50 with a longer shank.
LangWilliams gets it. Thanks for the info. Here's what I'm going to get. Your input helped. Thanks again.
http://www.ebay.com/itm/T-50-3-Long-...MAAOSwopRYbnYh
Last edited by Detroit Iron; May 21, 2017 at 07:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
