6” pullback risers

Reply Subscribe

Thread Tools

Search this Thread

Dec 29, 2017 | 12:52 AM

P8ence

Thread Starter

Intermediate

Joined: Dec 2017

Posts: 40

Likes: 0

From: Perth

6” pullback risers

29 DEC 2017 03:36 PM
Hi looking at putting 6" pullback risers on my fatty 2010. Currently have the stock ones.. can I get the 6" to fit my 1.25 bars? As I can not seem to find and seems I have to go down to 1" bars which I don't want to do..
also can i go with my current cables or will I need to replace?

Anyone done this previously?

Thanks

Dec 29, 2017 | 09:20 AM

rednred

Tourer

Joined: Jul 2013

Posts: 338

Likes: 44

From: Colorado

I did the 4" for 1.25 bars.
Part number for 6" is 56267-09.

The upper brake line may need replaced on mine - or might need to do some 'adjusting' - on full lock left the line is up against tank. Everything else is fine. I assume with the 6" you would be forced to replace that.

Last edited by rednred; Dec 29, 2017 at 09:27 AM.

Dec 29, 2017 | 11:43 AM

Toner123

Tourer

Joined: Jul 2015

Posts: 267

Likes: 94

From: va

Look at bungking.com. to my knowledge, they can make what ever you want. Their price seems to be really good for custom ones. Thinking of using them for my street bob

Dec 29, 2017 | 02:18 PM

Mr.Softy

Seasoned HDF Member

Joined: Jul 2009

Posts: 5,023

Likes: 1,352

From: Virginia

L.A. Choppers has the 6" risers and you may need to change out the brake cable.

Dec 29, 2017 | 09:25 PM

P8ence

Thread Starter

Intermediate

Joined: Dec 2017

Posts: 40

Likes: 0

From: Perth

Thanks all

Dec 30, 2017 | 11:44 PM

BigRed117

Outstanding HDF Member

Joined: Dec 2017

Posts: 2,493

Likes: 1,051

From: Atlanta

I have seen the HD 4 inch pull back riser on a new Breakout and they look very sharp. It was surprising how much of a change in looks just four inches made. Owner loves them.

Dec 31, 2017 | 04:16 PM

rednred

Tourer

Joined: Jul 2013

Posts: 338

Likes: 44

From: Colorado

I'll second that for fat boy. Compared to stock FB the 4" is something like 2" up and 3/4" back. Had it out for a couple short runs before snow/cold fell but based on quick rides it may all that is needed for me.

Quote:

Originally Posted by BigRed117

I have seen the HD 4 inch pull back riser on a new Breakout and they look very sharp. It was surprising how much of a change in looks just four inches made. Owner loves them.