harley fatboy slip on mufflers
Thread Starter
|
Grand HDF Member
Joined: May 2009
Posts: 4,677
Likes: 141
From: haverhill mass
harley fatboy slip on mufflers
i have the 2010 fatboy lo want to change out my slip on mufflers there are 4 little bolts to get off real tight spot to get at has anybody put slip on mufflers on any help would be great thanks
Advanced
Joined: Feb 2015
Posts: 81
Likes: 14
From: San Jose, CA
I'm assuming these are the ones that hold the existing mufflers to the support bracket. I recently replaced my entire exhaust and while I tried to get to these, I couldn't until I had removed the entire mounting bracket. Made no odds since I was replacing the bracket anyway and had to do it, but it might be an easier option for you.
Stellar HDF Member
Joined: Nov 2004
Posts: 3,156
Likes: 41
From: So Cal
Pull the mounting brackets off with the slip ons and then change them while off the bike.
Often slip ons are really difficult to remove, if you can soak them a day in advance with wd40 or he like and loosen the clamps all the way, it usually takes a good amount of wiggling to get them moving.
Often slip ons are really difficult to remove, if you can soak them a day in advance with wd40 or he like and loosen the clamps all the way, it usually takes a good amount of wiggling to get them moving.
Thread
Thread Starter
Forum
Replies
Last Post
