2009 softail problem.
Thread Starter
|
Road Master
Joined: Apr 2010
Posts: 1,216
Likes: 79
2009 softail problem.
I have a 2009 crossbones, and the battery went dead. I installed a new battery, when I turn it on, the fuel
pump doesn’t activate and when I turn it over it just makes a clicking sound.
many ideas? Thanks!
pump doesn’t activate and when I turn it over it just makes a clicking sound.
many ideas? Thanks!
Thread Starter
|
Road Master
Joined: Apr 2010
Posts: 1,216
Likes: 79
I had it on a trickle charger. The power went out, and unbeknownst to me, (we recently moved) the outlet had a fuse in it. It popped, and as such, the battery died. I had shoulder surgery last year, and just now I’m able to ride again. I was home from work for a couple days, and thought I’d get the bike out to ride. I’m going back to work, so I’ll be gone for a while. I’ll have to Try to tackle it when I return.
Seasoned HDF Member
Joined: Oct 2012
Posts: 13,092
Likes: 13,025
From: Texas, USA
It sounds like the new battery is dead (yes it is possible). Do the lights come on when you turn on the ignition? Did you charge the new battery before installing it? A trickle charger or battery tender will not charge a dead or near dead battery.
What is the new battery's current voltage?
What is the new battery's current voltage?
Thread Starter
|
Road Master
Joined: Apr 2010
Posts: 1,216
Likes: 79
It sounds like the new battery is dead (yes it is possible). Do the lights come on when you turn on the ignition? Did you charge the new battery before installing it? A trickle charger or battery tender will not charge a dead or near dead battery.
What is the new battery's current voltage?
What is the new battery's current voltage?
the lights come on when u turn the ignition switch. The fuel pump is not running when I push the run switch, then when I turn it over it clicks.
Grand HDF Member
Joined: Sep 2017
Posts: 4,578
Likes: 11,820
From: 3rd stone from the sun
Check your fuses possibly the surge may have shorted the fuse that runs the fuel pump
Thread
Thread Starter
Forum
Replies
Last Post
Tony I'Anson
Electrical/Lighting/Alarm
0
Jun 28, 2012 04:30 PM
