Springer Quits While Riding
Seasoned HDF Member
Joined: Sep 2008
Posts: 14,178
Likes: 11,278
From: San Diego, CA
I had that bolt come loose once on my '03 Heritage and it caused all sorts of issues...
Thread Starter
|
Novice
Joined: Aug 2021
Posts: 19
Likes: 6
From: Olympia, WA
I've cleaned both ends of the negative cable, cleaned the ground on the regulator and am working on cleaning the ignition switch. Because the stoppage is intermittent, even after cleaning the ignition switch or installing a new ignition switch, the bike may operate normally. Anyway, thanks to all for your great suggestions. I've learned quite a bit about Harley maintenance and am enjoying, although at times a little frustrating, working on my Harley.
Thread Starter
|
Novice
Joined: Aug 2021
Posts: 19
Likes: 6
From: Olympia, WA
I've since replaced the ignition switch and so far, no issues. However, because the quitting was intermittent, I'm continuing to trouble shoot and will be checking the throttle position sensor, crankcase sensor, coil and plug wires. I also plan to clean the throttle body.
Again, thanks to all for your inputs. I'll close this thread and, with luck, won't have to reopen it again.
Again, thanks to all for your inputs. I'll close this thread and, with luck, won't have to reopen it again.
Thread
Thread Starter
Forum
Replies
Last Post
Wookalar
Ignition/Tuner/ECM/Fuel Injection
0
May 9, 2016 09:44 PM
mchildree
Ignition/Tuner/ECM/Fuel Injection
3
Nov 21, 2012 06:30 PM
Indy Cruiser
Ignition/Tuner/ECM/Fuel Injection
3
Feb 9, 2011 09:23 AM
