big bore kit and cam
Road Warrior
Joined: Sep 2007
Posts: 1,373
Likes: 5
From: Northern Virginia
RE: big bore kit and cam
Yes you will be able to tell the difference.
If you are doing the work yourself you will save a lot of $$$.
Many others will chime in with their opinion on parts. The one thing I would go with is gear driven cams.
If you are doing the work yourself you will save a lot of $$$.
Many others will chime in with their opinion on parts. The one thing I would go with is gear driven cams.
Thread Starter
|
6th Gear
Joined: Jan 2008
Posts: 11
Likes: 0
From:
RE: big bore kit and cam
yes i am going with gear driven cam just wondering whats a good price parts and labor and dyno tune price i got so far is 2300.00 bucks i have hooker drag pipes high flow air cleaner and power comander allready on bike
Tourer
Joined: Oct 2007
Posts: 292
Likes: 0
RE: big bore kit and cam
A little high but my local stealer ship runs a discount on big bore kit during winter months and charges 1500 then you would have to upgrade the cams. As far as telling the difference you will really feel the extra power. I did it and loved it and then put on bigger cams and performance heads and the 95 rocks and pulls hard through every gear.
Advanced
Joined: Nov 2007
Posts: 87
Likes: 0
RE: big bore kit and cam
poontamer...If you are anywhere near NH, give Reggie at R&R a call or go to rrcycles.com. Even if your not in the area, you can send your stuff to them and have a local help you out in your area with the install. Their stage 2 95" kit is really easy to install even if you don't have much experience. Get yourself the shop manual and go for it. You can have your heads and cylinders worked gear drive cams and pistons, etc. from R&R for less than the $2300 you got for a price if you already have a power commander. It should be $2100 with gear drive cams and no power commander. I can promise you from experience that it will blow your mind.For another $500-$600 you should be able to get it installed.
Cruiser
Joined: Jan 2008
Posts: 184
Likes: 0
RE: big bore kit and cam
You may want to talk to Kevin or Doug at Headquarters. They put out some great products. I used them for my 95" build. Still need to dial in, but it has so much torque. Check out the site.
http://www.head-quarters-usa.com/
http://www.head-quarters-usa.com/
Tourer
Joined: Aug 2007
Posts: 268
Likes: 0
From: Dirty Jerzey
RE: big bore kit and cam
I just dropped off my07 Deuce. I had a 96" and upticking to the hd 103" phase II kits with the 255 cams. I went in to change the cams and ended up do the big bore kits. Parts and labor i got on a winter special for $1600 out the door. I wanted the 110" kits but was bumped up to $3800. All shops should offer winter package breaks. I ended up getting 25% off labor and 20% off parts. Stoked to feel the added power and torque. Shop it, you should get some good winter specials.
Thread
Thread Starter
Forum
Replies
Last Post
06GliderGuy
Blowers/Turbos/Nitrous Oxide
4
Oct 16, 2010 09:35 AM
Mario77746
Softail Models
11
May 13, 2010 08:38 AM
