just ordered the progressive airtail
Thread Starter
|
Road Captain
Joined: Mar 2007
Posts: 617
Likes: 1
From:
just ordered the progressive airtail
just ordered it last night for my night train. pretty excited. anyone thats installed this have any suggestions, trouble shooting tips with installation?
Road Warrior
Joined: Apr 2007
Posts: 1,737
Likes: 0
From:
RE: just ordered the progressive airtail
I want that SO BAD! My springer would look SICK slammed but the boards already drag as it is, so it would be nice to ride high when i hit the twisties,
What did that run ya if you dont mind me askin?
What did that run ya if you dont mind me askin?
Thread Starter
|
Road Captain
Joined: Mar 2007
Posts: 617
Likes: 1
From:
RE: just ordered the progressive airtail
i just went with the shocks alone, gonna manual fill for now. they were 750$ on JP. I just want it down 2" and wanted the best ride. I plan on adding the compressor kit eventually, i just want to get used to manual fill before i can slam it up and down on the fly.
Cruiser
Joined: Dec 2006
Posts: 150
Likes: 0
From: Montreal , Canada
RE: just ordered the progressive airtail
ORIGINAL: boone432
i just went with the shocks alone, gonna manual fill for now. they were 750$ on JP. I just want it down 2" and wanted the best ride. I plan on adding the compressor kit eventually, i just want to get used to manual fill before i can slam it up and down on the fly.
i just went with the shocks alone, gonna manual fill for now. they were 750$ on JP. I just want it down 2" and wanted the best ride. I plan on adding the compressor kit eventually, i just want to get used to manual fill before i can slam it up and down on the fly.
First , you have pay too much for your shock set
You can easily have them for less than 600$ on Ebay Second , after installing them , be sure to check the air fitting with a sprayer and water mix with a little soap to see if you have a leak.
My mechanic have install my shock set and didnt check for leak and i after taking my bike ,i have feel the dead very closed in scrapping my frame in a curve and pass very closed to hit a 10 wheeler in the other lane because my bike was so low , i wasnt able to turn
Be sure to read the manual and always keep 10 psi in each chamber to prevent piston to jam
I have the little pump and it do the job but i have order the inboard compressor last week ...
you will like your new suspension !
sorry for my spelling , english is not my mother tongue
Thread
Thread Starter
Forum
Replies
Last Post
MAX EVO
Frame/Suspension/Front End/Brakes
1
Sep 6, 2006 12:32 PM
