Crossbones dyno results
Thread Starter
|
Cruiser
Joined: Aug 2007
Posts: 141
Likes: 0
From: Superior, WI
Crossbones dyno results
Just got my bike back from the dealer for the 1000 mile service and dyno tune. \\; Baseline before being dyno tuned: \\; \\; HP=71 \\; Torque=81 \\; \\; After dyno tune: \\; HP=75 \\; \\; Torque=86 \\; \\; They found that my bike was running a little on the lean side. \\; It not only sounds better when idling but it starts better and runs smoother.
Tourer
Joined: Apr 2008
Posts: 272
Likes: 0
From: greenville SC
RE: Crossbones dyno results
Nice bike. I allso just got my bike dynoed the other day, I had got a map from a dude in here and i ajusted a little and got pretty close, my \\;numbers were 73HP and 85TQ my bike was runing a little lean allso, so i came home and richened it up a little and it allso sounded better and no more decel poping. I am thinking of a nother dyno pull, just a hours power pull is on special at local dealer for 24 bucks. to see if i got any more out of it.
[IMG]local://upfiles/58656/32314C2DD3AC402A8E520B567350FF54.jpg[/IMG]
[IMG]local://upfiles/58656/9C3E66FD30D846509EDAEA78A70F3B22.jpg[/IMG]
[IMG]local://upfiles/58656/37BCD455F323462582AABCAE27C26D2A.jpg[/IMG]
[IMG]local://upfiles/58656/32314C2DD3AC402A8E520B567350FF54.jpg[/IMG]
[IMG]local://upfiles/58656/9C3E66FD30D846509EDAEA78A70F3B22.jpg[/IMG]
[IMG]local://upfiles/58656/37BCD455F323462582AABCAE27C26D2A.jpg[/IMG]
Road Captain
Joined: Jun 2007
Posts: 644
Likes: 0
From: NE. Pennsylvania
RE: Crossbones dyno results
DJ Custom, would you be interested in sharing that map?? or what numbers did you increase on sert.?? I have not full around with sert with my laptop yet, from what Ive learned from the forum, .....The thing that sucks, is if you choose to load in another map, it supposedly doesn't save the dealers installed map.
 \\;
I am getting some decel pop, and great gas mileage, so Im prop on the lean side.
 \\;
I am getting some decel pop, and great gas mileage, so Im prop on the lean side.
Tourer
Joined: Apr 2008
Posts: 272
Likes: 0
From: greenville SC
RE: Crossbones dyno results
6165 sure i will send it to ya when i get home this evening.Send me your e-mail add. to djcustom1@aol'com. Yes if you load a new map you can not save old map. Your dealer that dyno tune your bike sould have gave you a copy of your map.To richen it up across the bourd, i went into constant tuning and made the cubic inchs of the motor larger, went from 96ci to100ci. If any Q let me know.
 \\;
 \\; \\; \\; DJ
[IMG]local://upfiles/58656/3CEEE83A34FB47F4B31401D3208C2163.jpg[/IMG]
 \\;
 \\; \\; \\; DJ
[IMG]local://upfiles/58656/3CEEE83A34FB47F4B31401D3208C2163.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
Nicky Pass
Touring Models
10
Jan 9, 2012 02:55 PM
