When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 06 FXSTI and want to relocate the turn signals to the fork with the kit from HD. I bought the kit, but have to remove the tank to access the signal wires. I ain't an idiot, but with the service manual I have and attempting tank removal, and half way through I said screw it. It would be much easier to cut/splice the signal wires to complete the job. Here's my question.....is it as nasty of a job as I think it is just to remove the tank? Or.....am I being lazy?
I ran into same thing relocating my signals from handlebars to below passing lamps. \\; From info I got on forum some of guys said you could just loosen the tank and get to connector on right side of tank. \\; It was a pain but I was able to do it and extract pins from old signals and insert new signal wires without splicing.
I did neither, I relocated my turn signals from the mini apes down to the front forks and tied off the wires behind the headlight, I will be changing the apes to drag bars at some point over the winter and \\;when I take off the tank I'll redirect the signal wires at the time.
Bone \\;\\\\\\;
+1...there's enough wire to take the signals down to the forks...I zipped 'em up behind the headlight then re-routed the wires \\;last winter when I went to drags
ORIGINAL: Vikingnomad
I did neither, I relocated my turn signals from the mini apes down to the front forks and tied off the wires behind the headlight, I will be changing the apes to drag bars at some point over the winter and \\;\\\\\\;when I take off the tank I'll redirect the signal wires at the time.
Bone \\;\\\\\\;\\\\\\\\\\\\\\;
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.