OK I know I am not a Dummy
Thread Starter
|
Advanced
Joined: Apr 2008
Posts: 60
Likes: 0
From: Sacramento, CA
OK I know I am not a Dummy
This is for the Rocker engine. I am by no means a mechanic of a gearhead but I do know a little something about engines and know how to use a wrench, HOWEVER...... I wanna change my spark plug wires to something that is stylish and functional like the wires that Magnum has to offer. www.Magnumshielding.com. I called for the fitment and they tell me that the (#1)front wire is 19" and is female at 90 degrees coil end and the spark plug end is female at 180 degrees. The (#2) rear is 6 3/4", female at 90 degrees coil and spark plug is also female. I called a Harley dealer and they measured a kit for the Rocker and their measurements are similar but male ends for the coil. Now when I took the wires off they measured 7" and the spark plug boot is 45 degrees. Now am I wrong of the two other dealers/distributers. Oh yea part # at Magnum is 3041C that I was quoted.
~Drk~
~Drk~
Thread
Thread Starter
Forum
Replies
Last Post
dwyleecoyote
Ignition/Tuner/ECM/Fuel Injection
1
Sep 21, 2011 08:46 PM
