When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Going to have to get a fender, paint job. Lots of bucks. I personally think the tombstone tail light has run its course. What would look good on yours would be a lay down lens and with your black paint the blacked out one would look good. http://www.customchrome.net/icatalog/full.aspx?Page=264
Going to have to get a fender, paint job. Lots of bucks. I personally think the tombstone tail light has run its course. What would look good on yours would be a lay down lens and with your black paint the blacked out one would look good. http://www.customchrome.net/icatalog/full.aspx?Page=264
I've never seen those lay down lenses before...those are sweet. I'm gonna have to pick one of those up when I've got some extra $$$ to play with.
Never saw one on the Fatboy but I do have one on my Deluxe which has a very similar rear fender, minus some chrome trim. I think it looks good personally.
Never saw one on the Fatboy but I do have one on my Deluxe which has a very similar rear fender, minus some chrome trim. I think it looks good personally.
Could you post of pic of what it looks like installed? I'm curious about the look when it's actually on the bike. Thanks
I have a Fatboy Fender on my Bones. J&P said their Tombstone light would fit, it didn't, thank God for a good return policy. Stock light it is for now.
I just made one for my fatboy the cover the tail light and lays flat with inspection below it. I use the turn lamps for the tail also. I will be adding led tag lamps soon to light the tag at night. I am also making a single reat tail light from harley old school front turn signal. I have the "rearalerts" i got on ebay for $20 and they are great. I will post pictures soon
well I finished the tag cover where the tail light used to be. cost me about $20. Then I mounted the tail lamp and it cost me about $12 total including the lamp. I have not finished the wires from the lamp. I am looking for old cloth insulation that looks like old school spark plug wire. I also have a few other options for getting rid on the tail lamp cheap. because I have the Harley kit for the turn run option I really don't need a tail lamp and could option for led post or strip to light the tag. I also have the rearalert installed http://www.flickr.com/photos/9044807...7603103987069/
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.