Milwaukee Twins Exhaust?

Reply Subscribe

Thread Tools

Search this Thread

Feb 22, 2009 | 10:29 PM

Ridiculous

Thread Starter

Advanced

Joined: Apr 2007

Posts: 96

Likes: 0

From: Plattsmouth, NE

Milwaukee Twins Exhaust?

well i'm basically just wantin some info on these pipes here...http://www.jpcycles.com/productdetai...&page=&search=

i've always been a fan of this style and i'd like to get em i'm thinkin but i've not heard much about M.T. exhaust, are they good quality or not? i don't want to put junk on my bike.

also will they even fit my 08 fxstc? it just says 86-06 softail on their website...what ya'll think?

oh one more thing...think they'll look good on my bike? pic in sig.

Feb 22, 2009 | 11:06 PM

5speedblu

Road Captain

Joined: Aug 2008

Posts: 534

Likes: 0

From: Good Old "New England"

dont know if they will fit, yes they will look cool, they will be LOUD,

keep in mind there is no heat shields so you will see the bluing of the chrome

Feb 22, 2009 | 11:19 PM

Ridiculous

Thread Starter

Advanced

Joined: Apr 2007

Posts: 96

Likes: 0

From: Plattsmouth, NE

oh for sure, loud is good. maybe i'll just call them sometime in the near future and find out. i don't see why not. maybe someone else knows.

and they've got the heat sheids in the catalog that fit the pipes, or maybe i'll wrap them instead...hmmm, what ya think?

Feb 22, 2009 | 11:31 PM

jeepedest

Outstanding HDF Member

Joined: Mar 2008

Posts: 2,378

Likes: 0

From: Illinois

you need to call them and make sure they have the bungs for o2 sensors...........i was thinking about those too....nice looking pipes and cheap too

Feb 22, 2009 | 11:44 PM

BAGGED_STANDARD

Advanced

Joined: Feb 2009

Posts: 58

Likes: 0

From: Omaha, NE

i dont belive they will fit because of the 02 sensors and also you have a 200mm rear tire so i think that changes the game a little bit. anyway i would call before you give up on them.

Feb 23, 2009 | 07:18 AM

Ridiculous

Thread Starter

Advanced

Joined: Apr 2007

Posts: 96

Likes: 0

From: Plattsmouth, NE

thanks guys, i'll give em a ring and let ya know what i find out.

Feb 23, 2009 | 08:48 AM

rockerhead

Road Captain

Joined: Aug 2007

Posts: 609

Likes: 0

From: Sunny Sedona AZ

Remember what John J. Arbuckle said, "You get what you pay for!"
Why do you think that similar style pipes from Vance and Hines cost more than twice the amount?

Trending Topics

Stage 1 - What tuner are you using?

28

948
1979 XLH 1000 - a good year?

97

2.1k
Oil temp monitoring on a 23 Ultra Limited

27

650
Interview - A Straight-Talking Harley-Davidson Dealer

43

2.2k
New to me FLHTK

19

486

Feb 23, 2009 | 11:03 AM

bmr

Tourer

Joined: May 2008

Posts: 283

Likes: 2

From: San Antonio, TX

The Big Growls will fit an 08, I have a set of up and outs on my cross bones (with a 200mm tire). They are no O2 bungs that is why they only list '86-'06. I'm running a PCIII so the bungs weren't an issue.

The chrome is good quality. You will for sure need the heat shield or wrap these pipes, mine start to blue rather quickly. It could just be my fuel setup.

The pipes are LOUD and running no baffles you will lose some low end power.

Here is a couple of vids:
http://www.youtube.com/watch?v=8Bv0_xPXQzE

http://www.youtube.com/watch?v=0Ten7...eature=related

I got mine off ebay and saved $50, check out BKrider. It hard to beat for the price, or you can pay twice as much for a pipe that everyone else has.