Handlebar Risers for Fatboy
Thread Starter
|
Stage III
Joined: Jul 2008
Posts: 3
Likes: 0
From:
Handlebar Risers for Fatboy
I have a '99 FLSTF and I am looking to put some 4.5" pullback risers on for more comfort. I feel like I am leaning too far forward. I have "Chubby Beach Bars" on the bike now and wanted to know if I need to replace all of my cabeling to install the risers.
Need some help from someone who has done this!!! If I need to replace all of the cabeling what am I looking at $$$$.
Thanks!
Need some help from someone who has done this!!! If I need to replace all of the cabeling what am I looking at $$$$.
Thanks!
Stellar HDF Member
Joined: Nov 2004
Posts: 3,156
Likes: 41
From: So Cal
I have Wildones 504 Bars on my bike and used the stock cables and wiring. But I dont have enough slack to add taller risers I tried to install 3" Buffalo Risers which are only 1" taller than stock and I did not have enough cable.
Novice
Joined: Nov 2008
Posts: 24
Likes: 0
From: Portland, Or
I have a 99 fatboy and just took off my 4-1/2 pull back risers because they hit the gauge cluster. The PO put them on and didn't bother to correct the problem. I decided in the end to go with straight risers..FWIW
Thread
Thread Starter
Forum
Replies
Last Post
