bypassing the stock wiring

Reply Subscribe

Thread Tools

Search this Thread

Apr 28, 2006 | 12:03 AM

blinck27

Thread Starter

Intermediate

Joined: Apr 2006

Posts: 32

Likes: 0

From:

bypassing the stock wiring

Anyone bypassed the stock wiring circut board from tail light to the harness I need to get the turn signals to work along with the sidemount license plate I put on. I broke the circut board so I'm tryingto bypass the board. I dont want ot mess with the factory connectors because Harley wants .50 a pop for a .01 cent part thats B.S.
Any help??

Apr 28, 2006 | 01:10 AM

Mike05

Tourer

Joined: Jul 2005

Posts: 422

Likes: 0

From: Brookville, Ohio

RE: bypassing the stock wiring

I can't answer your question about the circuit board, but that picture of your bike gave me goose bumps! Great lookin' ride.

Apr 28, 2006 | 12:17 PM

Shovelhead Bob

Outstanding HDF Member

Joined: Apr 2006

Posts: 2,537

Likes: 21

RE: bypassing the stock wiring

If you are that strapped for cash, then "Hardwire" the whole system....

Apr 28, 2006 | 05:32 PM

canuk cruiser

Cruiser

Joined: Jun 2005

Posts: 249

Likes: 0

From:

RE: bypassing the stock wiring

Blinck,

What exactly broke? I just finished rewiring mine 2 nights ago. I cut the end of the plug off the Harley harness where it plugs into the rear taillight. I then cut the plugs off the signals and wired them all up. I put in my own quick disconnects in case I need to take apart. I also did the side mount plate. If that is what your doing let me know and I Can tell you exactly what I did.