LED Fuel Gauge
Club Member
Joined: Jun 2007
Posts: 3,435
Likes: 28
From: Living in open carry state :D
The issue I had on my Dyna when I installed this gauge was that the pin was not all the way in. It felt like it was, but a friend who is a mechanic fixed it by getting it all the way in.
I have a 2006 Heritage Softail. I'm trying to install the 75087-04 LED Fuel Gauge.
All the connections have been made, and are tight. The gray wire has been routed to PIN 9 in the speedometer housing. The low fuel light within the speedometer still illuminates. Am I missing something with the installation?
All the connections have been made, and are tight. The gray wire has been routed to PIN 9 in the speedometer housing. The low fuel light within the speedometer still illuminates. Am I missing something with the installation?
Seasoned HDF Member
Joined: Dec 2006
Posts: 9,911
Likes: 4,656
From: West Texas Sandhills
I have the Kuryakyn LED flush fuel gauge/volt meter and it has been working as advertised for about 3 years now. It shows less fuel than I actually have, but so did the stock fuel gauge before it was replaced.
Thread
Thread Starter
Forum
Replies
Last Post
