Softail Models Standard, Custom, Night Train, Deuce, Springer, Heritage, Fatboy, Deluxe, Rocker and Cross Bones.
Sponsored by:
Sponsored by:

Floorboard scrapin' question

Thread Tools
 
Search this Thread
 
Old Sep 11, 2006 | 05:06 PM
  #1  
Ctimrun's Avatar
Ctimrun
Thread Starter
|
Novice
Joined: Sep 2006
Posts: 18
Likes: 0
From: Sunny SoCal
Default Floorboard scrapin' question

Another question as I am about to take the plunge. Do all heritages scrape their floorboards during normal riding? What about two up? I am not sure my wife would be real happy with scrapin around every corner and she is trying to get me to buy a Road King because that is what we used to have....I don't want her to be unhappy, not want to ride because of it, then say, "I told you so!"
 
Reply
Old Sep 11, 2006 | 05:27 PM
  #2  
sleepneagle's Avatar
sleepneagle
Outstanding HDF Member
Joined: May 2006
Posts: 3,273
Likes: 7
From:
Default RE: Floorboard scrapin' question

scraping the floor boards has to do with how far you lay it over in a turn. You do not always scrap floorboards. besides they are hinged and will lift up. in 30,000 miles wore out the bottoms of my lower fairings and 2 sets of floor boards.
 
Reply
Old Sep 11, 2006 | 05:53 PM
  #3  
Rhubarb's Avatar
Rhubarb
Ultimate HDF Member
Joined: Nov 2005
Posts: 5,256
Likes: 5
From: Concord, CA
Default RE: Floorboard scrapin' question

Mine is lower than the heritage.
I can scrape when I want to, but I have learned where that limit is and stay just to the not-scraping side of it.
If you are used to a sport bike, you will probably scrape a lot.

Anyhow, the answer is... It will only scrape if you want it to. Other than the occasional accidental time.
 
Reply
Old Sep 11, 2006 | 06:40 PM
  #4  
HD Bones's Avatar
HD Bones
Road Captain
Joined: Aug 2006
Posts: 512
Likes: 1
From: Arlington, MA
Default RE: Floorboard scrapin' question

Nothin like "scrapin" every now and then to get the HOG juices flowin!
 
Reply
Old Sep 11, 2006 | 06:54 PM
  #5  
Kid N8's Avatar
Kid N8
Cruiser
Joined: Feb 2006
Posts: 177
Likes: 1
From: MidMO
Default RE: Floorboard scrapin' question

Well I have 5000 miles and I haven't leaned my to the limit yet. I haven't scraped one time. . . . . yet.
 
Reply
Old Sep 11, 2006 | 07:24 PM
  #6  
bobros's Avatar
bobros
Road Warrior
Joined: Jun 2006
Posts: 1,443
Likes: 3
From: Behind you
Default RE: Floorboard scrapin' question

I've been riding HD's for 20 years and have yet to scrape. Of course this is my first softail. My first 4 were 74"'s. I've intentionally tried to scrape and have failed. I've tried mostly on curves. Perhaps I should go to a parking lot and do some figure 8's. I would like to know my limit.
 
Reply
Old Sep 11, 2006 | 07:35 PM
  #7  
mimo's Avatar
mimo
Extreme HDF Member
Joined: Jul 2006
Posts: 10,058
Likes: 8
From: MEXICO
Default RE: Floorboard scrapin' question



My Fat Boy is lowered in the rear end and I used to scrap the floorboards often.

I took a riding course with a former L.A. motor patrol officer. One thing that he told me has prevented me fom scrapping my boards since then :

"Don't look how near your floorboards are from the ground when making tight turns!!! If you look down, you will go down!!! Instead look where you are going, fix you sight in your desired direction and nevermind your floorboards, head's up assh*le!!! "

Believe me, the right advice and the right tone of voice that is all it took.

I felt like I as in boot camp, but some bad habbits die hard and you must ride with technique. Geez, this guy really knew several tricks, and that day (8 hours of course) is one day I will never forget.

Best regards.
 
Reply
Old Sep 11, 2006 | 08:25 PM
  #8  
jjbirdboy's Avatar
jjbirdboy
Advanced
Joined: Aug 2006
Posts: 74
Likes: 0
From:
Default RE: Floorboard scrapin' question

I've had mine for 2 years now and have never scraped. With all these questions about scraping I looked at how low I was leaning the other night and I wasn't even really close. I must be a wuss.
 
Reply
Old Sep 11, 2006 | 08:31 PM
  #9  
Tommy Meisel's Avatar
Tommy Meisel
Tourer
Joined: Dec 2005
Posts: 260
Likes: 0
From:
Default RE: Floorboard scrapin' question

I scrape once in a while, but not that often. It does give you a quick pick me up when you feel it on your foot and hear it at the same time. If you have never scraped, you are not having as much fun as you could. If you scrape all the time, then maybe you are riding a bit too close to the edge. Moderation in all things...
 
Reply
Old Sep 11, 2006 | 10:38 PM
  #10  
the general's Avatar
the general
Cruiser
Joined: Aug 2006
Posts: 148
Likes: 0
From:
Default RE: Floorboard scrapin' question

Fun aint it.
 
Reply



All times are GMT -5. The time now is 07:13 AM.