LaPera Solo Seats
Thread Starter
|
Account Closed
Joined: Oct 2009
Posts: 682
Likes: 1
From: In the World
LaPera Solo Seats
Does anyone know if the Bare Bones Solo LK-007 and Silhouette Solo LK-850 seats attach to the rear fender like the OEM seat … with the two thumb screws?
If someone has one of these seats on their bike ... could you reply with a picture of the how the rear of the seat looks like from the top showing the attachment plate?
I’d like to put a LePera solo seat on my Fatboy Lo/FLSTFB… but I can’t tell how it attaches? And I’d like to keep using the current attachment points because I have a leather fender bib and Motherwell fender rack that work just great using the OEM attachment points.
Thanks much,
the…..Dutch…..man
If someone has one of these seats on their bike ... could you reply with a picture of the how the rear of the seat looks like from the top showing the attachment plate?
I’d like to put a LePera solo seat on my Fatboy Lo/FLSTFB… but I can’t tell how it attaches? And I’d like to keep using the current attachment points because I have a leather fender bib and Motherwell fender rack that work just great using the OEM attachment points.
Thanks much,
the…..Dutch…..man
Last edited by cpiad; Mar 31, 2011 at 04:48 PM. Reason: correct typos
Cruiser
Joined: Apr 2010
Posts: 136
Likes: 3
From: Olympic Penisula, Wa
Hey rquirch, do you think there is still enough room under that seat for a fuelpak?
Road Master
Joined: Apr 2010
Posts: 831
Likes: 14
From: Delawere
I just went threw this about a week ago. Mine is the wide tire (2010 fatboy) and I bought the LK-007 barebones. You do NOT use the two thumb screws.
The seat mounts to the single hole one back from the thumb screws. All I did was remove the plastic plug and threw in a screw bung I got from the dealer for $4.00.
There is room for the ECM and or PC-5 and also the two studs for the thumb screws stay where they are under the barebones.
Hope this helps.
The seat mounts to the single hole one back from the thumb screws. All I did was remove the plastic plug and threw in a screw bung I got from the dealer for $4.00.
There is room for the ECM and or PC-5 and also the two studs for the thumb screws stay where they are under the barebones.
Hope this helps.
Thread Starter
|
Account Closed
Joined: Oct 2009
Posts: 682
Likes: 1
From: In the World
So..it does NOT use the two OEM thumb screws? Is that right?
Trending Topics
Banned
Joined: Apr 2010
Posts: 533
Likes: 1
From: Houston, TX
NOPE!... just like coroner said above, it mounts to a single hole that is further back... you have to get rid of the thumbscrews... you can leave them in there but the seat is going to gap, i got rid of them and the plate that's under the fender...
about the fuelpak, YES! it takes a bit of patience but i was rocking my fuelpak and now my PC-V no problems... i have a picture of my install somewhere...
BTW, im selling my fuelpak if you want it.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
The Best and Worst Harley-Davidson Moves of 2025
Verdad Gallardo
Cruiser
Joined: Apr 2010
Posts: 136
Likes: 3
From: Olympic Penisula, Wa
NOPE!... just like coroner said above, it mounts to a single hole that is further back... you have to get rid of the thumbscrews... you can leave them in there but the seat is going to gap, i got rid of them and the plate that's under the fender...
about the fuelpak, YES! it takes a bit of patience but i was rocking my fuelpak and now my PC-V no problems... i have a picture of my install somewhere...
BTW, im selling my fuelpak if you want it.
about the fuelpak, YES! it takes a bit of patience but i was rocking my fuelpak and now my PC-V no problems... i have a picture of my install somewhere...
BTW, im selling my fuelpak if you want it.
sorry man picked up my fuel pak last sturgis, the V&H guys did my pipes and the pak.
does anybody know the same info on the LK-800....silhouette deluxe solo...on a 2011 fatboy lo...2 stock mounts......i`m lookin at this LK-800 or the corbin classic solo.
Last edited by Youngneg; Apr 1, 2011 at 06:50 PM.