Tail wiring harness for Rocker
Advanced
Joined: Aug 2014
Posts: 55
Likes: 30
From: KS
Painting them was an option from the beginning but I wanted the smoked lenses to black them out and sense the lenses on the stock ones don't come off I figured after market or stock non LED. I didn't realize the wiring would be such that a 2 wire non LED wouldn't work. It seems that everyone is switching to LED and using one of these aftermarket boxes to run the LED's. I'm going the other way and I'm guessing that it's not going to work.
Stage IV
Joined: Apr 2016
Posts: 4
Likes: 0
From: Lisbon, Maine
09 Rocker c turn signals
Painting them has always been an option but I wanted the smoked lenses to black them out and sense the lenses on the stock ones don't come off I figured after market or stock non LED. I didn't realize the wiring would be such that a 2 wire non LED wouldn't work. It seems that everyone is switching to LED and using one of these aftermarket boxes to run the LED's. I'm going the other way and I'm guessing that it's not going to work.
Stage IV
Joined: Apr 2016
Posts: 4
Likes: 0
From: Lisbon, Maine
Lights
What condition are they in? I would like to find a chrome set but I could paint yours to match my bike if I bought them right. Would you take $50 for them?
Stage I
Joined: Sep 2022
Posts: 1
Likes: 0
From: Idaho
Help
[Dors this badland work both front and back .QUOTE=UT-rckr;13755420]Yes, but it will require a Badlands Illuminator. There are probably other modules out there that will do this too, I just have experience with the Badlands model.[/QUOTE]
Thread
Thread Starter
Forum
Replies
Last Post
doggin_it
Softail Models
7
May 8, 2011 11:38 PM
