When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i drained my primary on my 08 train let it drip for about ten min. on the jiffy...put it up on a floor jack to refill...let it drip more...put a bottle of 20-50 Amsoil ...put her back on the jiffy...the next morn. fired it up and there's a knocking sound...took it off the jiffy stood her upright the knocking is gone..
so i guess 1 quart is not enough?
the repair manual states:
32 oz. wet
40 oz. dry
i need some enlightenment...anybody educate me...
p.s.
i posted the same on the
primary/tranny forum but just got one gentleman to reply
im not sure if i should be doing this
i drained my primary on my 08 train let it drip for about ten min. on the jiffy...put it up on a floor jack to refill...let it drip more...put a bottle of 20-50 Amsoil ...put her back on the jiffy...the next morn. fired it up and there's a knocking sound...took it off the jiffy stood her upright the knocking is gone..
so i guess 1 quart is not enough?
the repair manual states:
32 oz. wet
40 oz. dry
i need some enlightenment...anybody educate me...
p.s.
i posted the same on the
primary/tranny forum but just got one gentleman to reply
im not sure if i should be doing this
I changed mine to Redline about a week ago and did some reading on here about it as well as reading the owner's manual and my service manual. I have an '06 so I don't know if yours is the same. My owner's manual says to add 26 oz. of fluid through the clutch inspection cover opening but also states that the fluid should be visible (with the bike upright) in the bottom of the chaincase but be no higher than the bottom of the diaphragm sping. I ended up putting in an entire quart. Did you add the fluid through the clutch inspection cover or primary chain inspection cover? Not that it matters where you add it,but you verify the level throrugh the inspection cover. When I was reading about this on here, one guy said that he had to put in a quart and then another 4 oz. to get to the correct level. Maybe you need a few more ounces.
roadkingharry,
wow! thanx for the info!all i have is a derby cover ,to adjust the clutch, the only openning on the primary chaincase.i did a visual after loading the fluid and it was down there not close to the clutch basket...so i just got back from getting another qt.i'll post on update after i put more fluid in.
agin thanx for you insght
roadking,the problem is gone!!!!added 4 oz. to the initial 1 qt. and its all good...thanx again!!
Av8or,thank you too!!!!are you a pilot?
my father was in the air force and retired as a 747 Capt.
i salute you!!!!
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.