When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 02 Fat Boy with solid wheels, at times when riding the bike, I think I want to say swerve side to side just as if you were running on a grooved road, I have checked out both front and rear everything is tight, I have been told that the wind will catch the solid wheels and give you the same effect. Is this true?
Some people say they notice 'em catching wind, others say they can't tell the difference. After riding my Sloptail, wire on front, Sporty mag on back, and then riding a girl's Fat Boy (she wanted to ride a foot clutch/hand shift - hmm, seems to be a lotta gals on Fat Boys - must be chick bikes! ), I could feel the difference. Once I had ridden it awhile, I didn't seem to notice it as much. Getting back on my bike I noticed the difference again.
I put Arlen Ness Criss Cross wheels on and it made a huge difference. Before with the solid wheels the wind would catch and push me with it, especially when a big truck went flying buy. This 03 was the first I had owned with the solid wheels and I really didn't realize what a differance they make. It didn't take me long to make the change. Now, there are riders here that will tell you that it is a myth, but in my opinion the open wheel makes a big difference.
When riding in a breeze of 5-10 mph my bike is near out of control, my new Fatboy wants to be all over the road. It reminds me of a flag waving in the wind. I thought it was just me, being I am a rookie rider. A buddy and I traded bikes for a short time and he noticed the handling problem and I was able to relax riding his bike. I don't understand why Harley-Davidson uses the solid wheel knowing the unstableness of them. I am not a happy camper with the solid wheels, they add to the danger on the road.
You'll get a different answer from everyone who responds on this question. Some say that it makes a big difference and some say it makes no difference at all. After recently having the solid wheels taken off of my '02 Fat Boy and switching to a pair of RC Components "Wicked" wheels, I have to believe that the solids do catch the breeze and give you a little unwanted side to side movement.
Part of the problem may be 1. Where you live, and 2. What all has been done with the bike (such as saddlebags, windshields, etc...)
I've never owned a Fatboy, but I've owned a V-Rod which also has solid disc wheels. The ones on the V-Rod are actually cupped, seeming like they would be even worse. Well, the first V-Rod I ever rode was a rental that we took from San Diego all the way to Las Vegas, all arid, dry, desert climate. Did freeway the whole time, running between 80 and 90 the whole way....no problems. No problem with the wheels catching wind and getting pushed around, even when going around semi's.
Now fast forward about 6 months. I got back to Kansas City and decided to buy a V-Rod. Got mine with a set of saddlebags and a sport windshield. Whenever I'd get above 55 on mine...oh yeah, I noticed a BIG difference! The bike would be pushed all over the road. A semi passing was dowright frightening. I got some five spoke PM wheels put on, and it made all the difference in the world. Bike would track straight and true down the freeway even on windy days.
My opinion...air density depending on where you live may make enough of a difference to account for people's opinions. The air here in Missouri if very muggy and humid in the summertime, and you can feel how heavy the air is just walking though it. I think when you get up to higher speeds, such air density can make a big difference with these wheels.
Indeed... I do notice it on my 04 fatty with solids stock wheels.
We caught about a 5mph crosswind last fall all the way to Myrtle Beach and it felt as if I was basically riding in a continuous left turn to compensate. The other guy with me on his springer (spokes) had no issues.. but I was struggling.. after a while it just gets old. Of course this is speed dependent though.. He was insistent on ripping it up there around 80mph. If I slowed to 70mph, it wasn't such a problem, and 65mph was fine.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.