New wrap on the exhaust
Thread Starter
|
Cruiser
Joined: May 2011
Posts: 121
Likes: 0
From: Tennessee
New wrap on the exhaust
Since the last wrap got tore off I finally got around to wrapping them again. This time I took the advise of members and soaked the wrap in water, let it dry and then painted the wrap with the 2000 degree black paint. I'm diggin the look with the black wrap. Thanks for the motivation to do it Story808. What to do to it next, now that is the question!!
Thread Starter
|
Cruiser
Joined: May 2011
Posts: 121
Likes: 0
From: Tennessee
Yeah, those are the sampsons. No baffles and they are quite loud, louder than my cholos. I like em, just can't ride around slammed and take a sharp right turn. Pipes are so low that they will scrape at the radius at the back.
Trending Topics
Thought about taking my pipes off to paint the wrap with that 2000 degree paint...hows it holding up?
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
Cruiser
Joined: May 2011
Posts: 121
Likes: 0
From: Tennessee
So far so good. Just made sure I tapped all the chrome off when I had the pipes off. Put about 3 coats on them, smoked a little at first. Will report back in a few weeks to show how they are holding up.
Intermediate
Joined: Mar 2012
Posts: 43
Likes: 0
From: Fort Kent, Alberta
I'm planning on wrapping mine this weekend, how did you spray them after clamping the wrap down and not coat the pipe clamps? I'm assuming you used black spray over the black wrap right?