Exhaust Question
Thread Starter
|
Cruiser
Joined: Oct 2012
Posts: 205
Likes: 1
From: Brevard NC
Exhaust Question
Does anyone know of an exhaust that's either true dual or even a crossover that uses a 3-1/2 or 4" muffler instead of a narrow one?..I'm trying to create an old school FL look on my 12 Deluxe. Thanks Blooz
Seasoned HDF Member
Joined: Oct 2012
Posts: 13,092
Likes: 13,022
From: Texas, USA
Here's a start from Samson
True Dual crossovers with 4" mufflers
http://www.samsonusa.com/Exhaust/Tru...2-to-2013.html
Search the manufacturers websites
http://www.samsonusa.com/
http://www.vanceandhines.com/index.php
http://www.epiflex.com/
http://rinehartracing.com/
http://www.freedomperform.com/
What about 4" muffler slip-ons?
True Dual crossovers with 4" mufflers
http://www.samsonusa.com/Exhaust/Tru...2-to-2013.html
Search the manufacturers websites
http://www.samsonusa.com/
http://www.vanceandhines.com/index.php
http://www.epiflex.com/
http://rinehartracing.com/
http://www.freedomperform.com/
What about 4" muffler slip-ons?
Thread Starter
|
Cruiser
Joined: Oct 2012
Posts: 205
Likes: 1
From: Brevard NC
Those Samsons look nice Doc. A little long out the back, but I've found out that when your'e looking at exhausts, ya can't have your cake and eat it too.
Supertrapp made a nice 2 into 1 Vintage system... But they stop at 2011, and they discourage using the 02 sensor adapters. They say the sensor doesn't go deep enough into the pipe with the adapter...... 4" slip ons are nice, but what about a mounting system?..I'm assuming ya don't get much in that regard when ya buy a header and then try and get mufflers. This may wind up being something that isn't going to be available. Might be best to hold off till the makers decide to start on the 2012 models. Thanks for your help!
Supertrapp made a nice 2 into 1 Vintage system... But they stop at 2011, and they discourage using the 02 sensor adapters. They say the sensor doesn't go deep enough into the pipe with the adapter...... 4" slip ons are nice, but what about a mounting system?..I'm assuming ya don't get much in that regard when ya buy a header and then try and get mufflers. This may wind up being something that isn't going to be available. Might be best to hold off till the makers decide to start on the 2012 models. Thanks for your help!
Last edited by Bloozmann; May 1, 2013 at 12:15 AM.
Seasoned HDF Member
Joined: Oct 2012
Posts: 13,092
Likes: 13,022
From: Texas, USA
Those Samsons look nice Doc. A little long out the back, but I've found out that when your'e looking at exhausts, ya can't have your cake and eat it too.
Supertrapp made a nice 2 into 1 Vintage system... But they stop at 2011, and they discourage using the 02 sensor adapters. They say the sensor doesn't go deep enough into the pipe with the adapter...... 4" slip ons are nice, but what about a mounting system?..I'm assuming ya don't get much in that regard when ya buy a header and then try and get mufflers. This may wind up being something that isn't going to be available. Might be best to hold off till the makers decide to start on the 2012 models. Thanks for your help!
Supertrapp made a nice 2 into 1 Vintage system... But they stop at 2011, and they discourage using the 02 sensor adapters. They say the sensor doesn't go deep enough into the pipe with the adapter...... 4" slip ons are nice, but what about a mounting system?..I'm assuming ya don't get much in that regard when ya buy a header and then try and get mufflers. This may wind up being something that isn't going to be available. Might be best to hold off till the makers decide to start on the 2012 models. Thanks for your help!
Thread
Thread Starter
Forum
Replies
Last Post
