Rocker project
They emailed
Wheel, raked trees axle hardware roughly @$3600
13" rotor $300
PM 6piston brake between $400-500
Tire/mounted-$385
fender $750
so on and so on
Wheel, raked trees axle hardware roughly @$3600
13" rotor $300
PM 6piston brake between $400-500
Tire/mounted-$385
fender $750
so on and so on
Thread Starter
|
Cruiser
Joined: May 2011
Posts: 157
Likes: 0
From: Martinsville va
WOW!! I think I just talked myself into a 21". Maybe I just dont know enough about it but couldnt you just order the trees for the 7 degree rake from jp cycle for $500 or is there more to it than that? I guess you would have to rake out a 23" also?
Going to a 26" I think its safer to go with something that is engineered specifically for our bikes. I'm around big wheel bikes a lot and you can really see the different in some that just throws it o,\n, to those that take the time to think it out. IMO
With that being said I do ride like a maniac! LOL
I'm on the fence tho. I got a 21x3.25 but still thinking 23" or maybe a really fat 21 on a wideglide.
HHI trees are cheaper in the $600 range made for rockers.
26" just got booted LOL
With that being said I do ride like a maniac! LOL
I'm on the fence tho. I got a 21x3.25 but still thinking 23" or maybe a really fat 21 on a wideglide.
HHI trees are cheaper in the $600 range made for rockers.
26" just got booted LOL
Last edited by Hawaii-Five-Jo; Aug 21, 2013 at 02:14 PM.
I personally hate the fact that you pay/paid so much $$$ for the FXCW/C & still HD does not give you billet wheels...
This made me to look for an aftermarket 21x2.15 front & 18x8.5 in the rear and the most of them were charging me 3.5k to 4k for an entire set (pulley/rotors & wheels)
The price that these guys quoted was ridiculous almost 20% of the bike.,hence I got into production mode..
I purchased wheels blanks from renegade wheels (3D blanks) and i'm making them in my friend's factory...
I'm looking at a ball park figure of 2750 for the whole set which is much better than what they quoted me & it is going to be one off design..
Will post a new thread once I completely finish making it
This made me to look for an aftermarket 21x2.15 front & 18x8.5 in the rear and the most of them were charging me 3.5k to 4k for an entire set (pulley/rotors & wheels)
The price that these guys quoted was ridiculous almost 20% of the bike.,hence I got into production mode..
I purchased wheels blanks from renegade wheels (3D blanks) and i'm making them in my friend's factory...
I'm looking at a ball park figure of 2750 for the whole set which is much better than what they quoted me & it is going to be one off design..
Will post a new thread once I completely finish making it
Last edited by shrini23; Aug 21, 2013 at 02:52 PM.
I think you gonna have to go with a neutral color. Something that compliments the blue. It's gonna be hard. Maybe just add to the blue? Remove the flames shave the badge from the tank. Maybe two tone with white. That's just me lol
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski