Windshield cleaning question
Seasoned HDF Member
Joined: Mar 2010
Posts: 38,694
Likes: 6,474
From: Honah Lee
It was like a thin plastic tint on my first shield, but it was part of it and on the front. There was a couple pieces of tape on shield and when I pulled it off, off came tint. My second shield is clear and a whole lot less noticeable on the bike.. When you think about shield should be correct when you look over it, having a tinted shield is sort of silly.
Outstanding HDF Member
Joined: Apr 2012
Posts: 2,938
Likes: 30
From: North Florida
I've had three over the years, one of them I was able to remove the film using a pressure washer, then sanding out the scratches and then buffing it with rubbing compound.
The other one I could not get the film off and I tried everything, including alcohol and acetone, (not at the same time.)
They are lexan and can be buffed with pretty good results, if you can get the film off.
The other one I could not get the film off and I tried everything, including alcohol and acetone, (not at the same time.)
They are lexan and can be buffed with pretty good results, if you can get the film off.
Thread
Thread Starter
Forum
Replies
Last Post
