Top speed limiter in ECM or Cobra FI 2000 R?

Reply Subscribe

Thread Tools

Search this Thread

Jun 11, 2015 | 10:56 PM

#11

crawrj

Tourer

Joined: Jun 2014

Posts: 250

Likes: 7

From: Kentucky

I've also had my 48 to 120 with my current setup. I took it up to 110 pure stock also. I did not experience anything at all. No stutter, cutting out our anything.

Jun 15, 2015 | 10:36 AM

#12

Rob Robb

Thread Starter

Tourer

Joined: Aug 2013

Posts: 435

Likes: 11

From: Bakersfield,California

Thanks everyone! I found in another thread peoples bikes cutting off at freeway speeds. They said check all battery wires & fuse connections. I did. I found main battery ground wire vibrated loose a little. I Found fuse for ECM had junk on it? I cleaned and coated all fuses with electric gel, tightened the battery ground. Well try top speed check today, if NO traffic allows it. Can't take it to Dealer without removing my mods and putting it back to stock because he said it's the Cobra unit, which I don't believe. If problem not cured I guess I'll spend a day putting all the stock parts back on and take it in on warranty LOL

Jun 15, 2015 | 04:57 PM

#13

Rob Robb

Thread Starter

Tourer

Joined: Aug 2013

Posts: 435

Likes: 11

From: Bakersfield,California

Ok I got her out, took it up too 100 mph, didn't cut out. Kept climbing slowly to 103 and front end started to wobble so I backed her down. May be the wind buffeting off wind shield? Did the 10 K service not long ago and all was fine with front end? Guess I'll have to be happy with that for now

Last edited by Rob Robb; Jun 16, 2015 at 01:26 AM.