Idle?
It has just over 500 miles.
It has Nance&Hines Big Radius 2 in to 2 exhaust, high flow air filter and tune with Vance&Hines FP3.
When I start my bike when cold, she will fast idle to about 2000rpm or so.
It'll stay that way for a min or two before idle down to around 1700rpm.
Stay that way for a while before settles to around 1000rpm~1050 rpm.
However, While she is at 2000rpm, and if I blip the throttle, she'll settle to 1700rpm right away and slowly settled down to 1000rpm~1050rpm.
This is while bike is cold.
Now after bike is up to operating temp, I shut the bike off, and start it back up within few mn(I.e. Gas station), bike is hot. But when I start her up, she'll still idle up to 2000rpm, and stay there just like when I start her cold
Does this sounds like how tuned ECU bike should idle to you guys?
I had these stuff installed in bike before I took delivery, there for I don't know how bike should idle based on temp without tune in it.



