Will I have to reset my Sportster 1200 Security System?
Thread Starter
|
Advanced
Joined: Nov 2010
Posts: 65
Likes: 12
Will I have to reset my Sportster 1200 Security System?
I tried searching for this on the forum and didn't exactly find what i was looking for. I have a 2010 Sportster 1200L. Because my bike didn't start, one of the things i did was pull the battery to have it tested. The test determined the battery was fine so I reinstalled it; then replaced the battery in the fob. The bike started. Will I/Should I have to reset the bike's security system since i disconnected the battery? I know how to do it (i think) if i follow the manual. But my question is do i HAVE to do it once the battery is pulled and then reconnected? Thanks in advance. It's just a pain to follow those instructions.
Seasoned HDF Member
Joined: Sep 2017
Posts: 12,218
Likes: 4,929
From: England
On my bike the procedure for removing the main fuse or battery is to turn on the ignition so the security disarms. Then just reconnect the battery as and when and all is good.
I have a siren and if I just pull the fuse the alarm will go off.
I have a siren and if I just pull the fuse the alarm will go off.
Thread
Thread Starter
Forum
Replies
Last Post
