how do you wrap pipes?

Reply Subscribe

Thread Tools

Search this Thread

Apr 9, 2010 | 02:18 PM

sorensentyler

Thread Starter

Road Captain

Joined: Feb 2010

Posts: 646

Likes: 159

From: New York

how do you wrap pipes?

i just got some exhaust wrap for my 08 XL883 it's fuel injected and was wondering if anyone knows how or has wrapped the stock pipes?

Apr 9, 2010 | 04:19 PM

blackyck

Tourer

Joined: Aug 2009

Posts: 375

Likes: 0

you tube has some easy tutorials.

Apr 9, 2010 | 08:19 PM

Stefan

Road Master

Joined: Dec 2007

Posts: 1,125

Likes: 22

From: Phoenix, AZ

If you use black be sure to buy the special paint else rain will cause the black to leech out & turn white.

Apr 9, 2010 | 10:24 PM

sorensentyler

Thread Starter

Road Captain

Joined: Feb 2010

Posts: 646

Likes: 159

From: New York

what is the paint called and where can i get it?

Apr 9, 2010 | 11:18 PM

DyNaBoB

Elite HDF Member

Joined: Feb 2006

Posts: 3,818

Likes: 2

From: Twin Cities

just use a high temp bbq paint....and wrap from back to the head to alow the overlap not to catch da wind

Apr 10, 2010 | 10:54 AM

Stefan

Road Master

Joined: Dec 2007

Posts: 1,125

Likes: 22

From: Phoenix, AZ

Quote:

Originally Posted by DyNaBoB

wrap from back to the head to alow the overlap not to catch da wind

If you have a S curve headder pipe, like on the Thunderheadder, you will need to use more steel ties for when the overlap reverses.

I seem to recall the original post being about stock headders.

The following webpage shows hi-temp paints.
http://www.thermotec.com/hi-heat-coating.html

Apr 10, 2010 | 10:59 AM

DR. V-TWIN

Former Sponsor

Joined: Jan 2009

Posts: 19,364

Likes: 40

From: Los Angeles, CA

I used the DEI silicone spray for the wrap. Here is how to wrap. Soak the wrap for a few minutes. Use hose clamps or metal zip ties to secure the wrap on the back of the pipe first. Wrap the wet wrap around the pipes all the way to the head (pipes off bike). Secure the other side with hose clamp or whatever. Let dry for a bit. Spray with silicone spray several times. Reinstall. Ride. It is very simple to do, but it does help to have an extra set of hands around. Wear rubber gloves so the fiberglass does not get in your hands. Mud from the Dyna section has a great tutorial on his homepage too.