When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just got a 2009 1200XL Low and it came with the stock schwinn curved bars. Me being 6'3" puts the bars right up on me. I was wounding if anyone knows of some good looking bars that work? I have been looking at some 6" rise Z bars or a 2" rise drag bar. Any help out there?
I put bars on my sportster from the A model V Rod . And did not have to change any wires or cables just had to rework the break line a little. It gave me a 2'' rize and a 2'' pullback and were 2'' wider so I can now say I can see out of my mirrors . And was much more comfortable on long rides.
Last edited by Iron lHorse; May 18, 2010 at 02:44 PM.
Got a set of 12" bars off a Dyna. They are 7" wider than stock and are still 1" diametre so they bolt right up. I didn't even have to change the bushings in mine (riser bushings).
I have been going through this since I got my bike.
I am most interested in a comfortable sporty ride, not looks.
After I got the sundown seat, it was worse as I kept sliding onto the gas tank.
First I got a set of low bars, almost drag bars, same bars as the custom has (55845-04) and they are great, but a bit too low and forward, plus the mirrors don't show anything but elbows.
Very nice at 60+ mph where the wind balances you, no sliding forward in the seat, a very sporty feel to the bike.
I then tried XL pullback bars, (56021-04b) way wide, plus the knurdled parts for the clamps are too wide and show. These seem just way to wide.
Today I found 55988-04, not sure what they are, but they are in between the stock bars and the low forward ones I have on now, should be just the ticket, although I do like the low bars a lot, just a bit too much force on the wrists at low speeds. They might be real nice with some small pullback risers, 1 inch up, one inch back might be perfecto.
I recommend these, more agressive stance with oout the squished in feeling you get fromthe factory low bars and no need to change any cables, they also come dimpled....
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.