LED Help
Thread Starter
|
Novice
Joined: Jun 2012
Posts: 16
Likes: 0
From: Round ROck, TX
LED Help
So i've got the fast-flash issue after replacing all of my bulbs with LEDs. I know that I need load equalizers in the front and rear and I have installed them. I have also verified that there is voltage to the correct wires at my load equalizers.
What I am getting is my left side signals (front & rear) flash correctly. My right side flash correctly for about 2 seconds and then go to the "fast-flash" mode. I'm out of ideas. Help please.
Current Equipment:
CD-Dynamic Ringz in front
CD-Red LEDs in back (with magic strobe)
Kuryakyn 2A Load Equalizers (p/n 4810)
What I am getting is my left side signals (front & rear) flash correctly. My right side flash correctly for about 2 seconds and then go to the "fast-flash" mode. I'm out of ideas. Help please.
Current Equipment:
CD-Dynamic Ringz in front
CD-Red LEDs in back (with magic strobe)
Kuryakyn 2A Load Equalizers (p/n 4810)
Thread
Thread Starter
Forum
Replies
Last Post
FLRoadKing
Electrical/Lighting/Alarm
8
May 8, 2017 04:00 PM
METALKAT
Touring Models
13
Apr 10, 2010 06:26 PM
