(LED) Front and Rear blinker load equalizer

Reply Subscribe

Thread Tools

Search this Thread

Mar 22, 2017 | 06:20 PM

FLRoadKing

Thread Starter

Cruiser

Joined: May 2016

Posts: 104

Likes: 7

From: Florida

(LED) Front and Rear blinker load equalizer

I'm going from stock to LED on all 4 blinkers. 2003 FLHRCI

Anyone know if I will need load equalizer on both sets of lights (the front and rear)?

I have heard some say front will not need equalizer but I don't know how that can be. My guess is I will need load equalizer for front and another for rear blinkers.

Any recommendations on lamps? Load equalizers?

Thank you.

Mar 22, 2017 | 07:00 PM

larsfum

Stellar HDF Member

Joined: Jan 2009

Posts: 2,578

Likes: 463

From: On a Lake, not far from the Gulf

I think one equalizer will handle all of the turn signals. They all operate on the same circuit.

Mar 22, 2017 | 07:06 PM

FLRoadKing

Thread Starter

Cruiser

Joined: May 2016

Posts: 104

Likes: 7

From: Florida

One of these smart techs. Told me each set would need a load equalizer. I would think they all work together, meaning same circuit. I suppose when I get home I'll check the schematic.

Mar 22, 2017 | 07:14 PM

RANGER73

Club Member

Joined: Sep 2010

Posts: 15,435

Likes: 7,127

From: Beyond Fucital

Quote:

Originally Posted by FLRoadKing

One of these smart techs. Told me each set would need a load equalizer. I would think they all work together, meaning same circuit. I suppose when I get home I'll check the schematic.

one for the left side one for the right. Do not put it ahead of the TSM.

Mar 22, 2017 | 07:14 PM

1plumr1

Road Warrior

Joined: Apr 2009

Posts: 1,800

Likes: 414

From: Ellensburg, WA

Call custom dynamics and get a system stabilizer for your particular bike. It does not generate heat and will handle all lights on the bike. Plug and play.

Mar 22, 2017 | 11:06 PM

FLRoadKing

Thread Starter

Cruiser

Joined: May 2016

Posts: 104

Likes: 7

From: Florida

Quote:

Originally Posted by RANGER73

one for the left side one for the right. Do not put it ahead of the TSM.

Ok so if I install only rear LED blinkers I will need 2 load equalizers (left and right) also or does your answer apply if I install 4 led blinkers? I'll research this one more.
All the installs on you tube and according to some vendors there is only one load equalizer for the rear lights.

Mar 23, 2017 | 09:43 AM

FLRoadKing

Thread Starter

Cruiser

Joined: May 2016

Posts: 104

Likes: 7

From: Florida

So far custom dynamics has what I need.
1 Stabilizer will work for all 4 blinkers.

Anyone else have recommended vendors?

I'm always getting excellent replies on this forum!