180 on a superlow?
Thread Starter
|
Advanced
Joined: Jul 2012
Posts: 99
Likes: 0
From: louisiana
180 on a superlow?
Im finding that with the added horsepower on my bike, a 150 doesnt seem to be enough tire so im thinking of swapping to a 180. I have an old 180 here that im measuring and pondering with, looks like the only issue i may run into would be the belt being very close but not touching the tire (belt guard would need to be removed) has anyone done this? Is there a way to space the belt and pulleys over 1/4 inch or so?
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
Your 150 tyre is certainly man enough for the job, so no need to change it because of that! However if you fancy a wider one that is another matter. You have the 180, so let us know how you get on. There are threads in here on fitting wide tyres to other Sporty models, so worth doing some reading!
Club Member
Joined: Feb 2007
Posts: 16,320
Likes: 306
From: Boynton Beach, FloriDuh
A 180 is likely going to call for a 4.00" - 5.00" wide rim, rather than the 3.00" you have.
FYI - A Metzeler ME880 160/80-16 is spec'd by the manufacturer for your 3" rim and will fit.
FYI - A Metzeler ME880 160/80-16 is spec'd by the manufacturer for your 3" rim and will fit.
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
Thread Starter
|
Advanced
Joined: Jul 2012
Posts: 99
Likes: 0
From: louisiana
correct, the rear wheel is 17x4.5 and the bike has 104hp/89tq im thinkin maybe ill just go back with a sticky 150, seems like alot of trouble and maybe mines just getting old is the reason its not hooking
Thread
Thread Starter
Forum
Replies
Last Post
