HELP PLEASE!!!
Thread Starter
|
Stage IV
Joined: Mar 2007
Posts: 4
Likes: 0
From:
HELP PLEASE!!!
I need help, does anybody have a diagram of how all the timing marks are supposed to be lined up on 1995 sportster 883. also some instructions on how to re install the cams would be nice. how do I push the rockers up to make room for the cam lobes to slide by. What position should the camshaft be in during this install. the cam had a red dot marking on it and is pointed in the 12 o'clock position as of now, is this the TDC (top dead center) marking? Please help me out any ideas or tips tonight would be great.
Road Captain
Joined: Feb 2007
Posts: 666
Likes: 1
From: Cavendish, Pei
RE: HELP PLEASE!!!
Turn all the cams so that the dots are pointing to each other, Then remove 1 cam and replace it , keep doing this until all cams are changed . I would take the rocker boxes off andtake the pressure on the lifters 1st. you do not want to pry up the lifters from the bottom. Sorry but it is the only way to do it correctly. . Are you using bolt in cams ? which ones? ...Mark...
Tourer
Joined: Jul 2006
Posts: 458
Likes: 1
From: Shreveport, LA
RE: HELP PLEASE!!!
HeyStrokrDiesel,
I have what you need from my 04 Sportster manual. Shoot me an email olesalt43@suddenlink.net and I'll scan and email 'em to ya.
I have what you need from my 04 Sportster manual. Shoot me an email olesalt43@suddenlink.net and I'll scan and email 'em to ya.
Thread
Thread Starter
Forum
Replies
Last Post
