East Tennessee machine shop
Road Warrior
Joined: Apr 2011
Posts: 1,596
Likes: 9
From: Cherokee Co. Georgia
What type of machine work are you looking to have done? Hopefully someone here will chime in if they knew exactly what your lookin for. I am thinkin if ya was to hang around Smokey Mtn. Harley there in Maryville a lil while & talk to some folks in there you could prolly get some good leads. Good Luck!
Thread Starter
|
Cruiser
Joined: Jul 2012
Posts: 103
Likes: 0
From: knoxville
What type of machine work are you looking to have done? Hopefully someone here will chime in if they knew exactly what your lookin for. I am thinkin if ya was to hang around Smokey Mtn. Harley there in Maryville a lil while & talk to some folks in there you could prolly get some good leads. Good Luck!
Tourer
Joined: Apr 2011
Posts: 362
Likes: 8
From: Tennessee
You may want to do what I did with my dragbikes. Send them off to a reputable company that specializes in performance machine work. Shipping would not be that much and you pick your builder. Other then that Boswells Harley Davidson has a machine shop in Nashville
Last edited by flashracer; Dec 15, 2014 at 08:56 PM.
Grand HDF Member
Joined: Nov 2004
Posts: 3,917
Likes: 184
From:
I've used these guys for a 106" build that was awesome and used them with my new bike as well. Excellent tuners also, give them a call you want be sorry.
Advanced
Joined: Jun 2014
Posts: 53
Likes: 0
From: Tennessee
Give J&B Performance a call. They are close to Morristown, actually Mosheim to be exact. They can do all the work you need and will do a great job. Ask for Justin at 423-972-8705 or Brandon at 423-470-4108. Try Justin 1st.
I've used these guys for a 106" build that was awesome and used them with my new bike as well. Excellent tuners also, give them a call you want be sorry.
I've used these guys for a 106" build that was awesome and used them with my new bike as well. Excellent tuners also, give them a call you want be sorry.
Thread Starter
|
Cruiser
Joined: Jul 2012
Posts: 103
Likes: 0
From: knoxville
Give J&B Performance a call. They are close to Morristown, actually Mosheim to be exact. They can do all the work you need and will do a great job. Ask for Justin at 423-972-8705 or Brandon at 423-470-4108. Try Justin 1st.
I've used these guys for a 106" build that was awesome and used them with my new bike as well. Excellent tuners also, give them a call you want be sorry.
I've used these guys for a 106" build that was awesome and used them with my new bike as well. Excellent tuners also, give them a call you want be sorry.
thanks,
I will call them today.
Trending Topics
Club Member
Joined: Dec 2007
Posts: 4,192
Likes: 168
From: Knoxville, Tn
Machine Shop
Depends on what you are looking to have done..I have used a machine shop in Knoxville to have some pulleys milled down and axle spacers cut.
It's Flemings Machine Shop near the start of Magnolia Ave.
It's Flemings Machine Shop near the start of Magnolia Ave.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
Dark Knight
Canada
2
Jan 2, 2014 01:39 PM